Dieses Bild zeigt Siegfried Schmauder

Siegfried Schmauder

Prof. Dr. rer. nat. Dr. h. c.

Professor im Ruhestand

Kontakt


Pfaffenwaldring 32
70569 Stuttgart
Deutschland

Fachgebiet

Werkstoffwissenschaft, Verbundwerkstoffe, Verformung, Schädigung
Gefüge/Eigenschaften-Korrelation, meso- und mikrostrukturelle Modellierung

 Gesamtliste aller Veröffentlichungen
1.

S. Schmauder, W. Mader, M. Rühle, "Calculations of Strain Distributions in and around ZrO2-Inclusions", Advances in Ceramics 12, Science and Technology of Zirconia II, Eds.: N. Claussen, M. Rühle, A.H. Heuer, American Ceramic Society, Columbus, Ohio, USA, pp. 251-255 (1984).
2. S. Schmauder, H. Schubert, "Significance of Internal Stresses for the Martensitic Transformation in Yttria-Stabilized Tetragonal Zirconia Polycrystals During Degradation", J. Amer. Cer. Soc. 69, pp. 534-540 (1986).
3. A.G. Evans, M.C. Lu, S. Schmauder, M. Rühle, "Some Aspects of the Mechanical Strength of Ceramic Metal Bonded Systems", Acta Metall. 34, pp. 1643-1655 (1986).
4. S. Schmauder, L. Sigl, M. König, H. Fischmeister, "Elastic-Plastic Calculation of Multi-Ligament Zones in a WC‑Co Material", XV. Int. Finite Element Congress, Baden-Baden, Germany, November 17‑18, IKOSS GmbH, Stuttgart, pp. 213-236 (1986).
5. S. Schmauder, "Residual Stresses in ZrO2-Ceramics due to Thermal Expansion Mismatch", Residual Stresses in Science and Technology, Vol. 2, Eds.: E. Macherauch, V. Hauk, DGM-Informationsgesellschaft Verlag, Ober­ursel, Germany, pp. 611-618 (1987).
6. S. Schmauder, "Finite Element Studies of Crack Growth in a WC-Co Multiligament Zone", Numerical Methods in Fracture Mechanics, Eds.: A.R. Luxmoore, D.R.J. Owen, Y.P.S. Rajapakse, M.F. Kanninen, Pineridge Press, Swansea, UK, pp. 387-400 (1987).
7. S. Schmauder, S. Kohlhoff, "Interfacial Delamination and Cracking in Layered Composites by Thermal and External Load", Proceedings Int. Finite Element Conf., Finite Elements in Engineering Appli­cations, Stutt­gart, March 11-12, INTES GmbH, Stuttgart, pp. 215-262 (1987).
8. S. Schmauder, "Theory of the Elastic Interface Crack", Fortschrittsberichte der Deutschen Keramischen Gesell­schaft: Werkstoffe, Verfahren, Anwendung 1986/1987, Beiheft zu CFI (Ceramic Forum Interna­tional) 2, pp. 101-108 (1987).
9. L.S. Sigl, S. Schmauder, "A Finite Element Study of Crack Growth in WC-Co", Int. J. Frac. 36, pp. 305‑317 (1988).
10. T. Suga, S. Schmauder, G. Elssner, "On the Interface Crack Models", J. de Physique Colloque 49, pp. (C5-) 539-544 (1988).
11. H. Fischmeister, S. Schmauder, L. Sigl, "Finite Element Modelling of Crack Propagation in WC-Co Hard Metals", 3rd Int. Conf. Sci. Hard Mat., Nassau, Bahamas, November 9-13, 1987, Mat. Sci. and Engng. A105/106, pp. 305-311 (1988).
12. T. Suga, G. Elssner, S. Schmauder, "Composite Parameters and Mechanical Compatibility of Material Joints", J. Comp. Mat. 22, pp. 917-934 (1988).
13. S. Schmauder, "Die Modellierung zähigkeitsbestimmender Prozesse in Mikrogefügen mit Hilfe der Finite-Elemente-Methode", Fortschrittsberichte VDI-Reihe 5, Nr. 146, VDI-Verlag, Düsseldorf, 281 S. (Buch) (1988).
14. E. Butenuth, H. Fischmeister, S. Schmauder, "Versuche zur Erfassung der plastischen Zone beim Grenzflächenbruch in Metall/Keramik-Verbundkörpern", Fortschrittsberichte der Deutschen Kerami­schen Gesellschaft: Keramische (Verbund-) Werkstoffe, CFI (Ceramic Forum International) 3, S. 85-94 (1988).
15. S. Schmauder, "Über die Fehler bei der Eigenspannungsberechnung in keramischen Werkstoffen", Fort­schrittsberichte der Deutschen Keramischen Gesellschaft: Keramische (Verbund-) Werkstoffe, CFI (Ceramic Forum International) 3, pp. 33-42 (1988).
16. S. Kohlhoff, S. Schmauder, "A New Method for Coupled Elastic-Atomistic Modelling", Atomistic Simulation of Materials: Beyond Pair Potentials, Eds.: V. Vitek, D.J. Srolovitz, Plenum Press, New York, London, pp. 411-418 (1989).
17. S. Schmauder, "Plastic Deformation under Mode I and Mode II Loading in WC-Co", Brittle Matrix Composites 2, Eds.: A.M. Brandt and I.H. Marshall, Elsevier Publishers Ltd., London, pp. 160-169 (1989).
18. S. Schmauder, "Nucleation of the Martensitic Transformation of ZrO2  in the System Al2O3-ZrO2", The Martensitic Transformation in Science and Technology, Eds.: E. Hornbogen, N. Jost, DGM-Informations­gesellschaft Verlag, Oberursel, Germany, pp. 519-523 (1989).
19. S. Schmauder, "Cracking and Plastic Deformation of WC-Co Hard Metals", Proceedings Plasticity '89, The Se­cond International Symposium on Plasticity and its Current Applications, Eds.: A.S. Khan, M. Toku­da, Pergamon Press, Oxford, England, pp. 527-530 (1989).
20. S. Schmauder, "Stress Analysis of Metal/Ceramic Composites" (Abstract), The Japan Institute of Me­tals, Fall Meeting, Sapporo, September 29 - October 1, p. 719 (1989).
21. H.F. Fischmeister, H.E. Exner, M.-H. Poech, S. Kohlhoff, P. Gumbsch, S. Schmauder, L.S. Sigl, R. Spieg­ler, "Modelling Fracture Processes in Metals and Composite Materials", Z. Metallkunde 80, pp. 839‑846 (1989).
22. S. Schmauder, H.F. Fischmeister, R. Spiegler, M.H. Poech, "Modellierung von Rißwachstumsvorgängen in Zweiphasenwerkstoffen", VI. Konferenz Metallkundliche Probleme der Werkstoff­entwicklung, Freiberg/Sachsen, September 13-15, 1989, Hrsg.: Bergakademie Freiberg, S. 226-239 (1990).
23. E. Butenuth, H.F. Fischmeister, L. Ratke, S. Schmauder, "Über die plastische Zone beim Bruch einer Metall‑Keramik‑Grenzfläche", Gefüge und Bruch, Materialkundl.-Techn. Reihe 9, Borntraeger, Berlin-Stuttgart, S. 95-101 (1990).
24. R. Spiegler, S. Schmauder, "Fracture Toughness Determination by Indentation Testing of WC-Co Alloys", Fortschrittsberichte der Deutschen Keramischen Gesellschaft, CFI (Ceramic Forum Inter­natio­nal) 5, pp. 181-194 (1990).
25. S. Kohlhoff, S. Schmauder, P. Gumbsch, "Coupled Atomistic-Continuum Calculations of Near Interface Cracking in Metal/Ceramic Composites", Metal-Ceramic Interfaces, Acta-Scripta Metallurgica Proceedings Series 4, Eds.: M. Rühle, A.G. Evans, M.F. Ashby, J.P. Hirth, Pergamon Press, Oxford, England, pp. 63‑70 (1990).
26. S. Schmauder, "Influence of Elastic Anisotropy on the Edge Problem", Metal-Ceramic Interfaces, Acta Scripta Metallurgica Proc. Series 4, Eds.: M. Rühle, A.G. Evans, M.F. Ashby, J.P. Hirth, Pergamon Press, Oxford, England, pp. 413-418 (1990).
27. R. Spiegler, S. Schmauder, H.F. Fischmeister, "Simulation of Discrete Void Formation in a WC-Co Micro­structure", Finite Elements in Engineering Applications, Proceedings of the Second Int. Finite Element Conference, Strasbourg, Ed.: INTES GmbH, Stuttgart, pp. 21-42 (1990).
28. S. Schmauder, "Radial Stresses in Spherical Inhomogeneities", ZAMM (Zeitschrift für angewandte Mathematik und Mechanik) 70, pp. 594-595 (1990).
29. R. Yuuki, J.-Q. Xu, S. Schmauder, "Simple Method to Analyze the Residual Thermal Stress of Dissimilar Materials and Some Applications" (in Japanese), Japanese Society of Mechanical Engineers (JSME) A57, pp. 172-178 (1991).
30. Y. Moriya, S. Aoki, K. Kishimoto, S. Schmauder, "Finite Element Analysis on Fracture of WC-Co Hard Alloys" (in Japanese), Japanese Society of Mechanical Engineers (JSME) A59, pp. 129-134 (1993).
31. R. Spiegler, S. Schmauder, L.S. Sigl, "Fracture Toughness Evaluation of WC-Co Alloys by Indentation Testing", J. Hard Mat. 1, pp. 147-158 (1990).
32. S. Schmauder, W. Mader, "Alternative Formulation of Elastic Fields due to Inhomogeneous Isotropic Spherical Inclusions undergoing Shape Conserving Volume Change", J. Appl. Mech. 59, pp. 1026-1027 (1992).
33. R. Spiegler, H.F. Fischmeister, M.H. Poech, S. Schmauder, "Crack Propagation in Two-Phase Materials", Microstructure and Mechanical Properties of Materials, Eds.: E. Tenckhoff, O. Vöhringer, DGM-Informations­gesellschaft Verlag, Oberursel, pp. 25-32 (1991).
34. R. Spiegler, S. Schmauder, H.E. Exner, "Modellierung der Verteilung thermischer Eigenspannungen in einer WC-10Gew.%Co--Legierung mit der Methode der Finiten Elemente", Festschrift zur Vollendung des 65. Lebensjahres von Prof. Dr. Dr.-Ing. E.h. Eckard Macherauch, Eds.: P. Mayr, O. Vöhringer, H. Wohlfahrt, DGM-Informa­tionsgesellschaft Verlag, Oberursel, S. 161-171 (1991).
35. D. Molnar, P. Binkele, S. Hocker, S. Schmauder, "Multiscale Modelling of Nano Tensile Tests for Different Cu-Precipitaion States in α-Fe", Multiscale Materials Modelling, Proceedings of the Fifth Int. Conference Multiscale Materials Modelling, Freiburg, Germany, Eds.: P. Gumbsch, E. van der Giessen, Fraunhofer Verlag, pp. 235-239 (2010).
36. R. Spiegler, S. Schmauder, H.E. Exner, "Finite Element Modelling of the Thermal Residual Stress Dis­tri­bu­tion in a WC-10wt%Co Alloy", J. Hard Mat. 3, No. 2, pp. 143-151 (1992).
37. R. Spiegler, S. Schmauder, H.F. Fischmeister, "A New Criterion for Void Formation in Ductile Fracture. - I. Derivation and Application to Plane Strain Crack Propagation", Int. J. Plasticity  (1992).
38. R. Spiegler, S. Schmauder, H.F. Fischmeister, "A New Criterion for Void Formation in Ductile Fracture. - II. Application to Ligament Rupture in WC-Co Alloys", Int. J. Plasticity (1992).
39. S. Schmauder, W. Müller, R.M. McMeeking, "Residual Stresses at Interfaces in Fiber-Reinforced Composites", Residual Stresses III, Science and Technology, Vol. PS A1-8, Eds.: H. Fujiwara, T. Abe, K. Tanaka, The Society of Materials Science, Kyoto, Japan, July 24-26, 1991, pp. 589-594 (1992).
40. W.H. Müller, S. Schmauder, "On the Behavior of r- and ϑ-Cracks in Composite Materials under Thermal and Mechanical Loading", Int. J. Solids Struct. 29, pp. 1907-1918 (1992).
41. W.H. Müller, S. Schmauder, "On r- and ϑ-Cracks in Thermally Stressed Composites", Advances in Local Fracture/Damage Models for the Analysis of Engineering Problems, Eds.: J.H. Giovanola, A.J. Rosakis, ASME, New York, AMD-Vol. 137, pp. 55-66 (1992).
42. S. Schmauder, W.H. Müller, "On the Influence of Elastic Mismatch on Stress-Intensity Factors of Cracks Perpendicular to a Bimaterial Interface", Int. J. Fract. 51, pp. R21-R27 (1991).
43. S. Schmauder, W.H. Müller, "On the Influence of Elastic Mismatch on Stress-Intensity Factors of Cracks Perpendicular to a Bimaterial Interface - Corrigendum", Int. J. Fract. 54, p. R15 (1992).
44. W.H. Müller, S. Schmauder, "Stress-Intensity Factors of r-Cracks in Fiber-Reinforced Composites Under Thermal and Mechanical Loading", Int. J. Fract. 59, pp. 307-343 (1993).
45. W.H. Müller, S. Schmauder, "Interface Stresses in Fiber-Reinforced Materials with Regular Fiber Arrangements", Comp. Struct. 24, pp. 1-21 (1993).
46. M. Meyer, S. Schmauder, "Thermal Stress Intensity Factors of Interface Cracks in Bimaterials", Int. J. Fract. 57, pp. 381-388 (1992).
47. G. Dreier, M. Meyer, S. Schmauder, G. Elssner, "Fracture Mechanics Studies of Thermal Mismatch Using a Four-Point Bending Specimen", Acta metall. mater. 40, pp. S345-S353 (1992).
48. M. Meyer, S. Schmauder, G. Elssner, "Mixed-Mode Fracture Investigations of Interface Cracks in Dissimilar Media", Mixed Mode Fracture and Fatigue, Eds.: H.P. Rossmanith, K.J. Miller, European Structural Integrity Society, Salisbury, U.K., pp. 303-318 (1993).
49. G. Dreier, S. Schmauder, G. Elssner, "Propagation and Facture Energy of Interface Cracks in Elastically Similar Brittle Materials under Mixed Mode Loading Conditions", Mixed Mode Fracture and Fatigue, Eds.: H.P. Rossmanith, K.J. Miller, European Structural Integrity Society, Salisbury, U.K., pp. 185-199 (1993).
50. S.M. Pickard, S. Schmauder, D.B. Zahl, A.G. Evans, "Effects of Misfit Strain and Reverse Loading on the Flow Strength of Particulate-Reinforced Al-Matrix Composites", Acta metall. mater. 40, pp. 3113-3119 (1992).
  H. Dève, S. Schmauder, "Role of Interface Properties on the Toughness of Brittle Matrix Composites Reinforced with Ductile Fibers", J. Mat. Res. 7, pp. 3132-3138 (1992).
52. D.B. Zahl, S. Schmauder, R.M. McMeeking, "Elastic Behaviour of Discontinuously Reinforced Composites", Z. Metallkunde 84, pp. 802-805 (1993).
53. S.J. Rozeveld, J.M. Howe, S. Schmauder, "Measurement of Residual Strain in an Al-SiCw Composite Using Convergent-Beam Electron Diffraction", Acta metall. mater. 40, pp. S173-S194 (1992).
54. Z. Li, Y. Zhao, S. Schmauder, "A Cohesion Model of Microcrack Toughening", Eng. Fract. Mech. 44, pp. 257-265 (1993).
55. G. Dreier, T. Suga, G. Elssner, S. Schmauder, "Determination of Residual Stresses in Bimaterials", J. Mat. Sci. 29, pp. 1441-1448 (1994).
56. C. Dietrich, M.H. Poech, S. Schmauder, H.F. Fischmeister, "Numerische Modellierung des mechanischen Verhaltens von Faserverbundwerkstoffen unter transversaler Belastung", Verbundwerkstoffe und Werkstoffverbunde, Hrsg.: G. Leonhardt und G. Ondracek, DGM-Informationsgesellschaft mbH, Oberursel, S. 611-618 (1993).
57. T. Steinkopff, S. Schmauder, "Modellierung der plastischen Verformung in Metall-Keramik-Verbunden mit Grenzflächenriß", Verbundwerkstoffe und Werkstoffverbunde, Hrsg.: G. Leonhardt und G. Ondracek, DGM-Informationsgesellschaft mbH, Oberursel, S. 547-554 (1993).
58. M. Meyer, S. Schmauder, G. Elssner, "Effect of Mode Mixity on Interface Cracks in Brittle Bimaterials Under CTS-Loading", Verbundwerkstoffe und Werkstoffverbunde, Hrsg.: G. Leonhardt und G. Ondracek, DGM-Informationsgesellschaft mbH, Oberursel, pp. 308-318 (1993).
59. G. Dreier, T. Suga, G. Elssner, S. Schmauder, "Ermittlung von Eigenspannungen in Bimaterialverbunden", Verbundwerkstoffe und Werkstoffverbunde, Hrsg.: G. Leonhardt und G. Ondracek, DGM-Informationsgesellschaft mbH, Oberursel, pp. 167-174 (1993).
60. S. Schmauder, M. Meyer, "Correlation Between Dundurs' Parameters and Elastic Constants", Z. Metallkunde 83, pp. 524-527 (1992).
61. S. Schmauder, M. Meyer, "Influence of Thermal Residual Stresses on the Interface Crack", Finite Elements in Engineering Applications, Proceedings of the Fourth Int. Finite Element Conference, Strasbourg, Ed.: INTES GmbH, Stuttgart, pp. 149-174 (1992).
62. J.H. Schneibel, R. Darolia, D.F. Lahrman, S. Schmauder, "Fracture Morphology of NiAl Single Crystals Tested in Tension", Metall. Trans. A 24A, pp. 1363-1371 (1993).
63. G. Dreier, S. Schmauder, "T-Stress Related to Thermal Residual Stresses in Bimaterials", Scripta Metall. Mater. 28, pp. 103-108 (1993).
64. E. Soppa, C. Dietrich, S. Schmauder, M.H. Poech, H.F. Fischmeister, "Zur Bildung von Ag2S-Kristallen an Ag/Ni-Phasengrenzen", Prakt. Met. Sonderbd. 24, S. 97-108 (1993).
65. P. Lipetzky, S. Schmauder, "Crack-Particle Interaction in Two-Phase Composites, Part I: Particle Shape Effects", Int. J. Fract. 65, pp. 345-358 (1994).
66. X. Ge, S. Schmauder, "Elastic Modulus and Interface Stress Constraint of Particle Reinforced Composites", Mat. Sci. Eng. A168, pp. 93-97 (1993).
67. P. Lipetzky, S. Schmauder, H. Fischmeister, "Geometrical Factors Related to Composite Microcracking", Computational Materials Science 1, pp. 325-332 (1993).
68. P. Lipetzky, S. Schmauder, "Particle Geometry Effects on a Stationary Crack", TMS-AIME, Advanced Composites ‘93, Int. Conf. Adv. Comp. Mats., Eds.: T. Chandra, A.K. Dhingra, The Minerals, Metals & Materials Society, pp. 289-294 (1993).
69. C. Dietrich, M.H. Poech, H.F. Fischmeister, S. Schmauder, "Stress and Strain Partitioning in a Ag-Ni Fibre Composite Under Transverse Loading: Finite Element-Modelling and Experimental Study", Computational Materials Science 1, pp. 195-202 (1993).
70. M. Sautter, C. Dietrich, M.H. Poech, S. Schmauder, H.F. Fischmeister, "Finite Element Modelling of a Transverse-Loaded Fibre Composite: Effects of Section Size and Net Density", Computational Materials Science 1, pp. 225-233 (1993).
71. J. Wulf, S. Schmauder, H. Fischmeister, "Finite Element Modelling of Crack Propagation in Ductile Fracture", Computational Materials Science 1, pp. 297-301 (1993).
72. M. Meyer, G. Elssner, S. Schmauder, "Interfacial Fracture Mechanics on Sandwich Specimens with Variable Layer Thickness", Computational Materials Science 1, pp. 270-275 (1993).
73. M. Meyer, S. Schmauder, "Definition of Thick and Thin Elastic Interlayers with Respect to External Loading", Scripta Metall. Mater. 28, pp. 743-745 (1993).
74. T. Steinkopff, J. Wulf, S. Schmauder, H.F. Fischmeister, "FE-Simulation von Versagensmechanismen in duktilen Werkstoffen mittels LARSTRAN", 3. PATRAN Anwender Forum am 4./5. März 1993 in Lenggries, PDA-Engineering International GmbH, München, S. 4.1-4.15 (1993).
75. X. Ge, D. Wu, S. Schmauder, "Microanalysis of Al/SiC Composite Material Fracture" (in Chinese), Acta Materiae Compositae Sinica 11, pp. 44-48 (1994).
76. M. Meyer, G. Elssner, S. Schmauder, "Effects of Elastic Interlayer Thickness on Interfacial Failure with Respect to Thermal Loading", Mis-Matching of Welds, ESIS 17 (Eds.: K.-H. Schwalbe and M. Koçak), Mechanical Engineering Publications, London, pp. 235-245 (1994).
77. G. Elssner, S. Schmauder, D. Korn, M. Meyer, "Fracture Mechanical and Structural Interpretation of Bond Strength in Material Joints", Mis-Matching of Welds, ESIS 17 (Eds.: K.-H. Schwalbe and M. Koçak), Mechanical Engineering Publications, London, pp. 19-33 (1994).
78. X. Ge, S. Schmauder, "Micromechanism of Fracture in Al/SiC Composites", J. Mat. Sci. 30, pp. 173-178 (1995).
78b. X. Ge, S. Schmauder, "In Situ Study of Microstructural Crack Propagation in Al/SiC Composites", Proceedings Int. Union Mat. Res. Soc., Int. Conf. on Adv. Mat., Eds.: S. Somiya, M. Doyama, M. Hasegawa, S. Yamada, IUMRS-ICAM-93, Aug. 31 - Sept. 4, Tokyo, Japan  Journal of Materials Science 30, pp. 173-178 (1995)
79. D.B. Zahl, S. Schmauder, R.M. McMeeking, "Mechanical Behavior of Residually Stressed Composites with Ductile and Brittle Constituents", Modell. Simul. Mater. Sci. Eng. 2, pp. 267-276 (1993).
80. W. Kreher, S. Schmauder, "Change of Elastic Energy due to Void Formation", ZAMM 75, pp. 485-486 (1995).
81. S. Schmauder, M. Meyer, G. Elssner, "Interfacial Cracks in Bimaterials under Thermal and Applied Stresses", Fracture Mechanics, Proceedings of the Indo-German Workshop on Advances in Fracture Mechanics, March 28-April 1, Bangalore, Eds.: A.V. Krishna-Murthy, F.-G. Buchholz, Interline Pub­li­shing, Bangalore, India, pp. 42-47 (1994).
82. X. Ge, S. Schmauder, "Elastic Modulus and Interface Stress Constraint of Particle Reinforced Composites", Materials under Extreme Conditions and Nanophase Materials, Eds.: G. Kostorz, I. Gorynin, V. Trefilov, H.-D. Kunze, B. Günther, B. Skorokhod, V. Troitsky, North-Holland, Amsterdam, NL, pp. 93-97 (1993).
83. G. Beltz, S. Schmauder, "A Multi-Plane Model for Defect Nucleation at Cracks", Defect-Interface Interactions, Eds.: E.P. Kvam, A.H. King, M.J. Mills, T.D. Sands and V. Vitek, MRS Proceedings 319, Materials Research Society, Pittsburgh, pp. 257-262 (1994).
84. E. Soppa, C. Dietrich, S. Schmauder, M.H. Poech, H.F. Fischmeister, "On the Formation of Ag2S-Crys­tals at Ag/Ni-Phase Boundaries", Prakt. Met. 31, pp. 179-189 (1994).
85. D.B. Zahl, S. Schmauder, "Transverse Strength of Continuous Fiber Metal Matrix Composites", Computational Materials Science 3, pp. 293-299 (1994).
86. D.B. Zahl, S. Schmauder, R.M. McMeeking, "Transverse Strength of Metal Matrix Composites Reinfor­ced with Strongly Bonded Continuous Fibers in Regular Arrangements", Acta metall. mater. 42, pp. 2983-2997 (1994).
87. W.H. Müller, H. Gao, C.-H. Chiu, S. Schmauder, "A Semi-Infinite Crack in Front of a Circular, Thermally Mismatched Heterogeneity", Int. J. Solids Struct. 33, pp. 731-746(1996).
88. J. Wulf, S. Schmauder, H. Fischmeister, "Simulation of Force-Displacement Curves by a Finite-Element Elimination Technique", Computational Materials Science  3, pp. 300-306 (1994).
89. Z.-Z. Du, R.M. McMeeking, S. Schmauder, "Transverse Yielding and Matrix Flow Past the Fibers in Metal Matrix Composites", Mech. Mater. 21, pp. 159-167 (1995).
90. Z. Li, Y. Zhao, S. Schmauder, "Transformation, Microcrack, and Thermal Residual Stress as Interactive Processes in ZrO2-Toughened Al2O3, Simulated by the Finite Element Method", Met. and Mat. Trans. A 25A, pp. 1725-1731 (1994).
91. J. Riedle, J. Wulf, S. Schmauder, "A Method for Measuring Compliances and Crack Length by Strain Gauge and 3D Finite Element Calculation", Eng. Fract. Mech. 51, pp. 323-325 (1995).
92. M. Ludwig, P. Gumbsch, S. Schmauder, "Coupled Atomistic-Continuum Calculations of Crack Propaga­tion in NiAl", WCCM III, The Third World Congress on Computational Mechanics, August 1-5, 1994, Chiba, Japan (Extended Abstracts), Vol. 1, p. 747 (1994).
93. A. Mukherjee, S. Schmauder, M. Rühle, "Artificial Neural Networks for the Prediction of Mechanical Behav­ior of Metal Matrix Composites", Acta metall. mater. 43, pp. 4083-4091 (1995).
94. L. Farrissey, S. Schmauder, M. Dong, E. Soppa, M.H. Poech, P. McHugh, "Investigation of the Strengthening of Particulate Reinforced Composites using Different Analytical and Finite Element Models", Computational Materials Science 15, pp. 1-10 (1999).
95. Z. Li, Y. Zhao, S. Schmauder, M. Dong, "Quantitative Characterization of Microcracking in Brittle Materials by Finite Element Modeling", Eng. Fract. Mech. 51, pp. 497-504 (1994).
96. Z. Li, S. Schmauder, M. Dong, "Basic Character of the Fracture and Yielding Strengths of Particulate Two-Phase Materials Predicted by a Local Virtual Fracture Model", Proceedings Int. Conf. Mech. Solids Mat. Eng., Eds.: N.L. Loh et al., Nanyang Technological University, Singapore, Vol. C, pp. 841-846 (1995).
97. S. Aoki, Y. Moriya, K. Kishimoto, S. Schmauder, "Finite Element Fracture Analysis of WC-Co Alloys", Eng. Fract. Mech. 55, pp. 275-287 (1996).
98. Z. Li, S. Schmauder, A. Wanner, M. Dong, "Expressions to Characterize the Flow Behavior of Particle-Reinforced Composites Based on Axisymmetric Unit Cell Models", Scripta metall. mater. 33, pp. 1289-1294 (1995).
99. Z. Li, S. Schmauder, M. Dong, "A Simple Mechanical Model to Predict Fracture and Yield Strengths of Particulate Two-Phase Materials", Computational Materials Science 15, pp. 11-21 (1999).
100. X. Ge, D. Wu, S. Schmauder, "In Situ Study of Microcrack in Al/SiCp Composites" (in Chinese), Acta Mechanica Solida Sinica 15, pp. 340-344 (1994).
101. S. Aoki, Y. Moriya, K. Kishimoto, S. Schmauder, "Finite Element Fracture Analysis of WC-Co Alloys", Dynamic Plasticity and Structural Behaviors, Proceedings of Plasticity '95, The fifth international symposium on plasticity and its current applications, July 17-21, 1995, Sakai, Osaka, Japan, Eds.: S. Tanimura, A.S. Khan, Gordon and Breach Publ., pp. 731-734 (1995).
102. S. Schmauder, M. Dong, "Vorhersage der Festigkeit von Verbundwerkstoffen", Spektrum der Wissenschaft 11, pp. 18-24 (1996).
103. M. Dong, S. Schmauder, "FE Modeling of Continuous Fiber and Particle Reinforced Composites By Self-Consistent Embedded Cell Models", Computational Methods in Micromechanics, ASME, AMD-Vol. 212 / MD-Vol. 62, pp. 81-86 (1995).
104. M. Dong, S. Schmauder, "Transverse Mechanical Behaviour of Fiber Reinforced Composites - FE Model­ling with Embedded Cell Models", Computational Materials Science 5, pp. 53-66 (1996).
105. M. Dong, S. Schmauder, "Modeling of Metal Matrix Composites by a Self-Consistent Embedded Cell Model", Acta metall. mater. 44, pp. 2465-2478 (1996).
106. S. Schmauder, J. Wulf, Th. Steinkopff, H.F. Fischmeister, "Micromechanics of Plasticity and Damage in an Al/SiC Metal Matrix Composite", IUTAM Symposium on Micromechanics of Plasticity and Damage of Multiphase Materials, Sèvres-France, 29.8.-1.9.1995, Eds.: A. Pineau, A. Zaoui, Solid Mechanics and its Applications, Kluwer Academic Publishers, London, pp. 255-262 (1996).
107. S. Schmauder, W.H. Müller, S. Haake, "Computer Modeling of the Mechanical Behavior of Composites - Interfacial Cracks in Fiber-Reinforced Materials", Scripta Metall. Mater. 34, pp. 1931-1935 (1995).
108. E. Soppa, M.H. Poech, H. Fischmeister, S. Schmauder, "Bestimmung örtlicher Verformungen in Ag/Ni-Teilchenverbundwerkstoffen mittels Mikrogittertechnik und Mikrohärtemessungen", Verbundwerkstoffe und Werkstoffverbunde, Hrsg.:G.Ziegler,DGM-Informationsgesellschaft mbH, Oberursel, S. 529-532 (1996).
109. J. Rohde, S. Schmauder, "Influence of a Functionally Gradient Surface on Cracking in WC/Co Hardmetals", Fracture Mechanics of Ceramics, Eds.: R.C. Bradt et al., Plenum Press, New York, Vol. 12, pp. 487-497 (1996).
110. S. Schmauder, D. Weichert, "Computational modelling of the mechanical behaviour of materials", Computational Materials Science 5, p. v (1996).
111. S. Schmauder, "Interfacial Fracture in the Presence of Residual Stresses", Fracture Mechanics of Ceramics, Eds.: R.C. Bradt et al., Plenum Press, New York, Vol. 12, pp. 443-450 (1996).
112. S. Schmauder, M. Dong, "Simulation des mikro- und makromechanischen Verhaltens von Verbundwerkstoffen", Verbundwerkstoffe und Werkstoffverbunde, DGM-Informationsgesellschaft mbH, Oberursel, S. 165-171 (1996).
113. J. Rohde, S. Schmauder, G. Bao, "Mesoscopic Modelling of Gradient Zones in Hardmetals", Computational Materials Science 7, pp. 63-67 (1996).
114. N. Lippmann, S. Schmauder, P. Gumbsch, "Numerical and Experimental Study of the Failure Mechanisms in AlSi-Cast Alloys", Localised Damage 96, Computer Aided Assessment and Control 3-5 June 1996, Fukuoka, Japan, Eds.: H. Nisitani, M.H. Aliabadi, S.I. Isida and D.J. Cartwright, Computational Mechanics Publications, Ashurs, pp. 333-340,(1996).
115. S. Schmauder, J. Wulf, Th. Steinkopff, H.F. Fischmeister, "Schädigungsmechanische Modellierung des mikrostrukturellen Versagens in Al/SiC-Verbundwerkstoffen", 28. Tagung des DVM Arbeitskreises Bruchvorgänge, 26.-27. Februar 1996, Bremen, DVM Deutscher Verband für Materialforschung und –prüfung E.V., S. 339-346 (1996).
116. F. Reusch, D. Klingbeil, S. Schmauder, "Simulation duktilen Rißfortschritts in einem Al/SiC-Verbundwerkstoff mit dem Materialmodell von Gurson", Micro Mat ‘95, Deutscher Verband für Materialforschung und -prüfung e.V., Berlin, S. 641-646 (1996).
117. H. Fischmeister, P. Gumbsch, S. Kohlhoff, S. Schmauder, T. Steinkopff, M.-H. Poech, C. Dietrich, M. Sautter, E. Soppa, J. Wulf, "Computermodellieren des Verhaltens von Verbundwerkstoffen", Max-Planck-Gesellschaft, Jahrbuch 1995, Hrsg.: Generalverwaltung der Max-Planck-Gesellschaft, München, Verlag Vandenhoeck & Ruprecht, Göttingen, S. 476-483 (1995).
118. L.L. Mishnaevsky Jr., S. Schmauder, "A Model of Damage and Fracture Based on Fuzzy Sets Theory", 11th European Conference on Fracture (ECF-11), "Mechanics and Mechanisms of Damage and Failure of Engineering Materials and Structures", Ed.: J. Petit, EMAS Ltd., Warley, UK, pp. 201-206 (1996).
119. F. Reusch, D. Klingbeil, S. Schmauder, "Simulation duktilen Rißfortschritts in einem Al/SiC-Verbundwerkstoff mit dem Materialmodell von Gurson", 28. Tagung des DVM Arbeitskreises Bruchvorgänge, 26.-27. Februar 1996, Bremen, S. 347-356 (1996).
120. N. Lippmann, P. Gumbsch, S. Schmauder, "Experimentelle Studie der Versagensmechanismen in AlSi-Gußlegierungen", Werkstoffwoche '96, Simulation, Modellierung, Informationssysteme, Hrsg.: J. Hirsch, DGM-Informationsgesellschaft mbH, Frankfurt (Main), Germany, S. 209-214 (1997).
121. N. Lippmann, S. Schmauder, P. Gumbsch, "Numerical and experimental study of early stages of the failure of AlSi-cast alloys", Journal de Physique IV, Colloque C6, supplément au Journal de Physique III, 6, pp. 123-131 (1996).
122. N. Lippmann, Th. Steinkopff, S. Schmauder, P. Gumbsch, "3D-Finite-Element-Modelling of Microstructures with the Method of Multiphase Elements", Conf. Proc. Modelling in Materials Science and Process, Eds.: M. Rappaz, M. Kedro, ECSC-EC-EACE, Brussels, Belgium, pp. 404-410 (1996).
123. L.L. Mishnaevsky Jr., S. Schmauder, "Strength of Particulate Composites with a High Content of High-Melting Point Filler", Engineering Foundation Conference in Processing and Design Issues in High Temperature Materials, Eds.: N.S. Stoloff and R.H. Jones, 19.-24. May 1996, Davos, Switzerland, TMS, Warrendale, USA, pp. 311-318 (1996).
124. S. Schmauder, M. Dong, J. Wulf, "Finite Elements in Micromechanics", Simulationstechniken in der Materialwissenschaft, Hrsg.: P. Klimanek und W. Pantleon, Freiberger Forschungshefte B279 Werkstoffwissenschaft, Werkstofftechnologie, Technische Universität Bergakademie Freiberg, pp. 41-50 (1996).
125. L.L. Mishnaevsky Jr., S. Schmauder, "Damage Localization in Heterogeneous Materials under Dynamical Loading: Stochastic Modelling", Comp. Mech. 20, pp. 89-94 (1997).
126. S. Schmauder, "Crystal Plasticity Modelling", Stuttgarter Uni-Kurier 72, S. 18 (1996).
127. L. L. Mishnaevsky Jr., S. Schmauder, "Damage Evolution and Heterogeneity of Materials: Model Based on Fuzzy Set Theory", Eng. Fract. Mech. 57, pp. 625-636 (1999).
128. M. Ludwig, S. Schmauder, "Modellierung von Werkstoffeigenschaften auf atomarer Ebene", Stuttgarter Uni-Kurier 72, S. 18 (1996).
129. N. Lippmann, Th. Steinkopff, S. Schmauder, P. Gumbsch, "3D-Finite-Element-Modelling of Microstructures with the Method of Multiphase Elements", Computational Materials Science 9, pp. 28-35 (1997).
130. B. Kempf, S. Schmauder, "Thermodynamic Modelling of the Precipitation Hardening of Gold Alloys", Gold Bulletin 31, pp. 51-57 (1998).
131. S. Schmauder, D. Raabe, Preface to Computational Materials Science 7, pp. vii-viii (1996).
132. M. Dong, S. Schmauder, T. Bidlingmaier, A. Wanner "Prediction of the Mechanical Behaviour of Short Fiber Reinforced MMCs by Combined Cell Models", Computational Materials Science 9, pp. 121-133 (1997).
133. Y. Akahoshi, S. Schmauder, M. Ludwig "Evaluation of Embrittlement of Iron by Molecular Dynamics Simulation", No. 97-1 Proceedings of the 74th JSME Spring Annual Meeting, Vol. I, pp. 162-163 (1997).
134. L.L. Mishnaevsky Jr., S. Schmauder, "Analysis of rock fragmentation with the use of the theory of fuzzy sets", EUROCK-96 - Prediction and Performances in Rock Mechanics and Rock Engineering,Balkema Publ., Rotterdam, Holland, 2.-5. September 1996, Torino, Italy. Proceedings/Comptes-Rendus/Sitzungsberichte ISRM Inter­nationales Symposium 1996.09.2-5, pp. 735-740 (1996).
135. L.L. Mishnaevsky Jr., S. Schmauder, "Informational Methods in Optimization of Tools", NATO-ARW Work­shop „PROBAMAT-21st Century“-Probabilities and Materials, Ust-Kachka, Perm, Russia, September 10-12, 1997, pp. 1-12 (1997).
136. S. Schmauder, E. Soppa, "Micromechanics of Composites", Proc. MicroMat ‘97, Eds.: B. Michel, T. Winkler, Verlag Druckhaus Dresden GmbH, Berlin, pp. 344-347 (1997).
137. O.I. Mintchev, J. Rohde, S. Schmauder, "Effect of Residual Stresses on the Strength of Brittle Matrix Composites", Proceedings Plasticity ’97: The Sixth Int. Symp. on Plasticity and its Current Appl., Ed.: A.S. Khan, Neat Press, Fulton, Maryland, USA, pp. 211-212 (1997).
138. S. Schmauder, M. Dong, "Micro-, Meso- and Macromechanical Modeling of Damage in an Al/Si Cast Alloy", Proceedings Plasticity ’97: The Sixth Int. Symp. on Plasticity and its Current Appl., Ed.: A.S. Khan, Neat Press, Fulton, Maryland, USA, pp. 275-276 (1997).
139. M. Dong, S. Schmauder, "Micro- and Macromechanical Modelling of Damage in an Al/Si Cast Alloy", Proc. MicroMat ‘97, Eds.: B. Michel, T. Winkler, Berlin, Verlag Druckhaus Dresden GmbH, Berlin, pp. 360-363 (1997).
140. M. Dong, S. Schmauder, S. Lütze, "Modellierung der Schädigung in kurzfaserverstärkten Polymermatrix-Modellwerkstoffen (Einzelfasermodell)", Verbundwerkstoffe und Werkstoffverbunde, Kaiserslautern, Hrsg.: K. Friedrich, DGM-Informationsgesellschaft Verlag, Oberursel, September 1997, S. 361-366 (1997).
141. P. Leßle, M. Dong, E. Soppa, S. Schmauder, "Simulation of Interpenetrating Microstructures by Self Consistent Matricity Models", Scripta mater. 38, pp. 1327-1332 (1998).
142. M. Ludwig, D. Farkas, D. Pedraza, S. Schmauder, "Embedded Atom Potential for Fe-Cu Interactions and Simulations of Precipitate-Matrix Interfaces", Modell. Simul. Mater. Sci. Eng. 6, pp. 19-28 (1998).
143. M. Dong, S. Schmauder, "Erratum to Transverse Mechanical Behaviour of Fiber Reinforced Composites: FE Modelling with Embedded Cell Models", Computational Materials Science 9, p. 431 (1998).
144. P. Leßle, M. Dong, E. Soppa, S. Schmauder, "Selbstkonsistente Matrizitätsmodelle zur Simulation des mech­anischen Verhaltens von Verbundwerkstoffen", Verbundwerkstoffe und Werkstoffverbunde, Hrsg.: K. Friedrich, DGM-Informationsgesellschaft mbH, Oberursel, S. 765-770 (1997).
145. M. Dong, S. Schmauder, Corrigendum - "Modeling of metal matrix composites by a self-consistent embedded cell model", Acta Materialia 44, pp. 2465-2478 (1996).
146. S. Schmauder, M. Dong, P. Leßle, "Verbundwerkstoffe mikromechanisch simuliert", Metall 7-8/97, S. 404-410 (1997).
147. M. Ludwig, S. Schmauder, "Computersimulationen im Nanobereich", Stuttgarter Uni-Kurier 75/76, S. 57 (1997).
148. S. Schmauder, "Was ist Mesomechanik ?", Stuttgarter Uni-Kurier 77/78, S. 27/28 (1998).
149. S. Schmauder, M. Ludwig, L. Farrisey, S. Hu, "Nanoscale Simulation of Stress-Strain Curves for α-Fe", Proceedings 7th German-Japanese Joint Seminar on Research in Structural Strength and NDE-Problems in Nuclear Engineering, Ed.: K. Kußmaul, Staatliche Materialprüfungsanstalt (MPA), University of Stuttgart, September 29-30, pp. Schmauder-1 - Schmauder-20 (1997).
150. M.-O. Nandy, S. Schmauder, B.-N. Kim, M. Watanabe, T. Kishi, "Simulation of Crack Propagation in Al2O3 Particle-Dispersed SiC Composites", J. Eur. Cer. Soc. 19, pp. 329-334 (1998).
151. E. Soppa, S. Schmauder, E. Bischoff: "Numerische und experimentelle Analyse des Mikroverformungsverhaltens eines Ag-Polykristalls", Verbundwerkstoffe und Werkstoffverbunde, Hrsg.: K. Friedrich, DGM-Informationsgesellschaft mbH, Oberursel, S. 607-612 (1997).
152. Y. Akahoshi, S. Schmauder, M. Ludwig, "Molecular Dynamics Simulation of Impact Test", Proceedings 23rd MPA-Seminar on Safety and Reliability of Plant Technology, October 1-2, Vol. 1, Hrsg.: Staatliche Materialprüfungsanstalt (MPA) Universität Stuttgart, pp. 22.1-22.11 (1997).
153. S. Schmauder, M. Dong, P. Leßle, "Simulation von Verbundwerkstoffen mit Teilchen und Fasern", XXIV. FEM-Kongreß in Baden-Baden, 17.-18. November 1997, Tagungsband, Hrsg.: A. Streckhardt, Kongreßorganisation, Ennigerloh, S. 445-462 (1997).
154. Y.Y. Deryugin, G.V. Lasko, S. Schmauder, "Relaxation Element Method", Computational Materials Science 11, pp. 189-203 (1997).
155. S.J. Lauf, H.-P. Maier, S. Schmauder, "Strength Behaviour of a Gas Pressure Sintered Siliconnitride (GPSSN) under Static and Cyclostatic Loading at 1250°C in Air", Proceedings of the 7th International Symposium on Fracture Mechanics of Ceramics 13, Moscow, Russia, 20-22 July 1999, pp. 329-334 (2002).
156. A. Cornec, S. Schmauder, Preface to Computational Materials Science 9, p. vii (1997).
157. E. Soppa, D. Amos, S. Schmauder, E. Bischoff, "The Influence of Second Phase and/or Grain Orientations on Deformation Patterns in a Ag Polycrystal and in Ag/Ni Composites", Computational Materials Science 13, pp. 168-176 (1998).
158. S.Y. Hu, M. Ludwig, P. Kizler, S. Schmauder "Atomistic Simulations of Deformation and Fracture of α-Fe", Modelling and Simulation in Materials Science and Engineering 6, pp. 567-586 (1998).
159. L.L. Mishnaevsky Jr., N. Lippmann, S. Schmauder, P. Gumbsch, "In-situ Observation of Damage Evolution and Fracture in AlSi7Mg0.3 Cast Alloys", Eng. Fract. Mech. 63, pp. 395-411 (1999).
160. H. Dietzhausen, M. Dong, S. Schmauder "Numerical Simulation of Acoustic Emission in Fiber Reinforced Polymers", Computational Materials Science 13, pp. 23-30 (1998).
161. O. Mintchev, J. Rohde, S. Schmauder, "Mesomechanical Simulation of Crack Propagation through Graded Ductile Zones in Hardmetals", Computational Materials Science 13, pp. 81-89 (1998).
162. S. Hönle, S. Schmauder, "Micromechanical Simulation of Crack Growth in WC/Co Using Embedded Unit Cells", Computational Materials Science 13, pp. 56-60 (1998).
163. S. Hönle, M. Dong, L. Mishnaevsky Jr., S. Schmauder, "FE-Simulation of Damage Evolution and Crack Growth in Two Phase Materials", Proceedings Euromech-Mecamat, Mechanics of Materials with Intrinsic Length Scale: Physics, Experiments, Modelling and Applications, Eds.: A. Bertram, S. Forest, F. Sidoroff, Publisher: Institut für Mechanik, Otto-von-Guericke-Universität Magdeburg, pp. 189-196 (1998).
164. G. Fischer, E. Soppa, S. Schmauder, Y.-L. Liu, "Modelling of Strain Localization in Real Microstructural Areas of the Particle Reinforced Metal-Matrix Composite Al 6061 – 10% Al2O3", Proceedings 19th Risø International Symposium on Materials Science, Modelling of Structure and Mechanics of Materials From Microscale to Product, 7.-11. September 1998, Eds.: J.V. Carstensen, T. Leffers, T. Lorentzen, O.B. Pedersen, B.F. Sørensen, G. Winther, Risø National Laboratory, Roskilde, Denmark 1998, pp. 261-266 (1998).
165. S. Schmauder, Internationales Mesomechanik-Forschungszentrum in Tomsk, Stuttgarter Uni-Kurier 77/78, S. 40 (1998).
166. M.-O. Nandy, N. Tohyama, B.-N. Kim, M. Enoki, S. Schmauder, T. Kishi, "FEM Simulation of Transverse Bridging in Fiber Reinforced Composites", J. Cer. Soc. Jap. 106, pp. 968-973 (1998).
167. S. Schmauder, E. Soppa, "Verformung und Bruch von Metallen mit nichtmetallischen Einschlüssen", 7. Symposium Nichtmetalle in Metallen '98, Hrsg.: D. Hirschfeld, GDMB Gesellschaft für Bergbau, Metallurgie, Rohstoff- und Umwelttechnik, Clausthal-Zellerfeld, S. 31-38 (1999).
168. D. Uhlmann, P. Kizler, S. Schmauder, "From Nanoscale to Macroscale: Study of Damage in Steels with Cu Precipitates Using Micromechanically Based Stress-Strain Curves", Proceedings 19th Risø International Symposium on Materials Science, Modelling of Structure and Mechanics of Materials From Microscale to Product, 7.-11. September 1998, Risø National Laboratory, Roskilde, Denmark, Eds.: J.V. Carstensen, T. Leffers, T. Lorentzen, O.B. Pedersen, B.F. Sørensen, G. Winther, Risø National Laboratory, Roskilde, Denmark, pp. 529-534 (1998).
169. E. Soppa, S. Schmauder, G. Fischer, "Numerical and Experimental Investigations of the Influence of Particle Alignment on Shear Band Formation in Al/SiC", Proceedings 19th Risø International Symposium on Materials Science, Modelling of Structure and Mechanics of Materials From Microscale to Product, 7.-11. September 1998, Risø National Laboratory, Roskilde, Denmark, Eds.: J.V. Carstensen, T. Leffers, T. Lorentzen, O.B. Pedersen, B.F. Sørensen, G. Winther, pp. 499-504 (1998).
170. M. Dong, P. Leßle, U. Weber, S. Schmauder, "Mesomechanical Modelling of Composites Containing FGMs Related Interpenetrating Microstructures Based on Micromechanical Matricity Models", Materials Science Forum Vols. 308-311, pp. 1000-1005 (1999).
171. S. Schmauder, "Thoughts on Damage Simulation of Precipitation Embrittlement in Ductile Materials Based on Modelling at Atomistic, Micro- and two Mesolevels", Proceedings 13th U.S. National Congress of Applied Mechanics, University of Florida, June 21-26, 1998, RB6 (1998).
172. M. Dong, S. Schmauder, "Micromechanical Simulation of the Mechanical Behavior of MMCs", Proceedings 5th International Conference on Composites Engineering, 5.-11. July, Las Vegas, USA, Ed.: D. Hui, University of New Orleans, Department of  Mechanical Engineering/New Orleans, LA 70148, pp. 239-240 (1998).
173. S. Schmauder, "Modellierung von Versetzungen und deren Auswirkungen auf das Werkstoffverhalten", Stuttgarter Uni-Kurier 80, S. 67 (1998).
174. E. Soppa, S. Schmauder, "Numerical Investigations of the Influence of Particle Alignment on Shear Band Formation in Al/SiC", Proceedings XXV. Int. FEM-Congress, 16.-17. November 1998, Baden-Baden, Hrsg.: A. Streckhardt, Kongreßorganisation, Ennigerloh, pp. 149-160 (1998).
175. S. Schmauder, A. Melander, P.E. McHugh, J. Rohde, S. Hönle, Or. Mintchev, A. Thuvander, H. Thoors, D. Quinn, P. Connolly, "New Tool Materials with a Structural Gradient for Milling Applications", J. Phys. IV France 9, pp. Pr9-147-Pr9-156 (1999).
176. D. Uhlmann, P. Kizler, S. Schmauder, "Linking Nanoscale and Macroscale: Calculation of the Change in Crack Growth Resistance in Steels with Different States of Cu Precipitation using a Modification of Stress-Strain Curves Owing to Dislocation Theory, Proceedings 24th MPA-Seminar on Safety and Reliability of Plant Technology, October 7-9, Vol. 2, Hrsg.: Staatliche Materialprüfungsanstalt (MPA) Universität Stuttgart, pp. 50.1-50.13 (1998).
177. K. Turan, S. Schmauder, "FEM Modelling of C/C-SiC Tube Joints for an Ultra High Temperature Heat Exchanger", Advanced Ceramics and Composites, 6. Interregionales Europäisches Kolloquium über Keramik und Verbundwerkstoffe – IEKC6, Ed.: R. Gadow and 145 Co-authors, Expert-Verlag, Renningen, pp. 326-336 (2000).
178. L. Farrissey, M. Ludwig, P.E. McHugh, S. Schmauder, "An Atomistic Study of Void Growth in Single Crystalline Copper", Computational Materials Science 18, pp. 102-117 (2000).
179. D. Xu, S. Schmauder, "The Plastic Energy Dissipation in Metal Matrix Composites during Cyclic Loading", Computational Materials Science 15, pp. 96-100 (1999).
180. D. Xu, S. Schmauder, E. Soppa, "Influence of Geometry Factors on the Mechanical Behavior of Particle- and Fiber-Reinforced Composites", Computational Materials Science 15, pp. 295-301 (1999).
181. Ye.Ye. Deryugin, G.V. Lasko, S. Schmauder, "Formation and Self-Organization of the LPD Bands within the Range from Meso- to Macrolevel in Polycrystals under Tensile Loading", Computational Materials Science 15, pp. 89-95 (1999).
182. S. Schmauder, "Internationaler Workshop on Computational Mechanics of Materials: Besseres Verständnis hochentwickelter Materialien nur interdisziplinär möglich", Stuttgarter Uni-Kurier 81, S. 83 (1999).
183. S. Schmauder, U. Weber, I. Hofinger, A. Neubrand, "Modelling the Deformation Behaviour of W/Cu Composites by a Self-Consistent Matricity Model", Technische Mechanik 19, pp. 313-320 (1999).
184. P. Leßle, M. Dong, E. Soppa, S. Schmauder, "Simulation of Interpenetrating Microstructures by Self Consistent Matricity Models", Materials Mechanics, Fracture Mechanics, Micro Mechanics, An Anniversary Volume in Honour of B. Michels 50th Birthday, Eds.: T. Winkler, A. Schubert, Fraunhofer IZM Berlin, Chemnitzer Werkstoffmechanik GmbH, Chemnitz, pp. 456-461 (1999).
185. L. Mishnaevsky Jr., S. Schmauder, "Advanced Finite Element Techniques of Analysis of the Microstructure-Mechanical Properties Relationships in Heterogeneous Materials: A Review", Phys. Mesomechanics 2, pp. 5-20 (1999).
186. D. Saraev, P. Kizler, S. Schmauder, "The Influence of Frenkel Defects on the Deformation and Fracture of α-Fe Single Crystals", Modell. Simul. Mater. Sci. Eng. 7, pp. 1013-1023 (1999).
187. S. Schmauder, "Computational Materials Science, Dierk Raabe, Wiley-VCH, Weinheim 1998, 379 Seiten", Buchbesprechung, DGM-Aktuell, Juni 1999, S. 26-27 (1999).
188. L. Mishnaevsky Jr., O. Mintchev, S. Schmauder, "FE-Simulation of Crack Growth using Damage Parameter and the Cohesive Surface Concept", ECF 12 - Fracture from Defects, Vol. II, Eds.: M.W. Brown, E.R. de los Rios and K.J. Miller, EMAS Publishing Company, Sheffield, pp. 1053-1057 (1999).
189. H.J. Böhm, S. Schmauder, Preface to Computational Materials Science 13, p. ix (1998).
190. P. Kizler, D. Uhlmann,  S. Schmauder, "Linking Nanoscale and Macroscale: Calculation of the Change in Crack Growth Resistance of Steels with Different States of Cu Precipitation using a Modification of Stress-Strain Curves owing to Dislocation Theory", Nuclear Engineering and Design 196, pp. 175-183 (2000).
191. H.-A. Crostack, G. Fischer, E. Soppa, S. Schmauder, Y.-C. Liu, "Localization of Strain in Metal-Matrix  Composites Studied by a Scanning Electron Microscope-Based Grating Method", J. Microscopy 201, pp.171-178 (2001).
192. I. Altpeter, G. Dobmann, K.-H. Katerbau, M. Schick, P. Binkele, P. Kizler, S. Schmauder, "Kupferausscheidungen im Werkstoff 15 NiCuMoNb 5 (WB 36): Werkstoffeigenschaften und Mikrostruktur, atomistische Simulation, ZfP mittels mikromagnetischer Prüfverfahren", 25. MPA-Seminar, Stuttgart, 7.-8. Oktober 1999, S. 26.1-26.22 (1999).
193. E. Soppa, S. Schmauder, G. Fischer, J. Thesing, R. Ritter, "Influence of the Microstructure on the Deformation Behaviour of Metal Matrix Composites", in: Simulationstechniken in der Materialwissenschaft, Hrsg.: P. Klimanek, M. Seefeldt, Freiberger Forschungshefte B 295, Werkstoffwissenschaft, Werkstofftechnologie, S. 1-13 (1999).
194. F. Bohner, J.K. Gregory, U. Weber, S. Schmauder, "Yielding in Notch Tensile Specimens with Graded Microstructures", Mechanics of Materials 13, pp. 627-636 (1999).
195. S. Schmauder, E. Soppa, U. Weber, L. Mishnaevsky, O. Mintchev, "Virtueller Blick ins Gefüge", Maschinenmarkt 106, S. 54-58 (2000).
196. P. Kizler, D. Uhlmann, S. Schmauder, "Linking Nanoscale and Macroscale: Calculation of the Change in Crack Growth Resistance of Steels with Different States of Cu Precipitation using a Modification of Stress-Strain Curves Owing to Dislocation Theory", Int. SFB 370 Workshop Integral Materials Modelling, Aachen, October 6th, 1999, Eds.: R. Sebald, G. Gottstein, Shaker Verlag, Aachen, pp. 115-124 (2000).
197. S. Schmauder, U. Weber, "Modelling the Deformation Behaviour of W/Cu Composites by a Self-Consistent Matricity Model", ECM'99, Progress in Experimental and Computational Mechanics in Engineering and Material Behaviour, Eds.: D. Zhu, M. Kikuchi, Y. Shen, M. Geni, Northwestern Polytechnical University Press, Xi'an, China, pp. 54-60 (1999).
198. S.Y. Hu, S. Schmauder, L.Q. Chen, "Atomistic Simulations of Interactions Between Cu Precipitates and an Edge Dislocation in bcc Fe Single Crystal", phys. stat. sol. (b) 220, pp. 845-856 (2000).
199. P. Kizler, D. Uhlmann, S. Schmauder, "Linking Nanoscale and Macroscale: Calculation of the Change in Crack Growth Resistance of Steels with Different States of Cu Precipitation using a Modification of Stress-Strain Curves Owing to Dislocation Theory", 1st Course: Composite Materials, Proceedings Int. School on Advanced Material Science and Technology, August 23-27, 1999, University of Ancona (Italy), pp. 50-62 (2001).
200. S. Schmauder, E. Soppa, Preface to Computational Materials Science 16, p. 1 (1999).
201. S. Nedelecu, P. Kizler, S. Schmauder, N. Moldovan, "Atomic Scale Modelling of Edge Dislocation Movement in the α-Fe-Cu System", Modell. Simul. Mater. Sci. Eng. 8, pp. 181-191 (2000).
202. E. Soppa, S. Schmauder, G. Fischer, J. Thesing, R. Ritter, "Influence of the Microstructure on the Deformation Behaviour of Metal-Matrix Composites", Computational Materials Science 16, pp. 323-332 (1999).
203. S. Schmauder, U. Weber, I. Hofinger, A. Neubrand, "Modelling the Deformation Behaviour of W/Cu Composites by a Self-Consistent Matricity Model", 1st Course: Composite Materials, Proceedings Int. on Advanced Material Science and Technology, August 23-27, 1999, University of Ancona, Jesi (Italy), pp. 63-74 (2001).
204. S. Schmauder, "Nanoscale and Continuum Mechanical Simulation of Precipitates", 6. Workshop Atomistische und kontinuumsmechanische Modellierung von Werkstoffeigenschaften, MPA Universität Stuttgart, MPA-Nachrichten Nr. 04+05 (2001).
205. P. Deimel, M. Hoffmann, E. Sattler, P. Kizler, S. Schmauder, "Wasserstoffversprödung mikroskopisch betrachtet. Informationen zu einem neuen DFG-Projekt an der MPA Stuttgart", MPA-Nachrichten 2/1999, S. 7 (1999).
206. S. Schmauder, U. Weber, E. Soppa "Computational Mechanics of Heterogeneous Materials – Influence of Residual Stresses", Computational Materials Science 26, pp. 142-153 (2003).
207. S. Schmauder, E. Soppa, J. Olschweski, Preface to Computational Materials Science 19, p. xi (2000).
208. S. Schmauder, H. Dietmann, "Die Finite-Elemente-Methode", Simulationstechniken in der Materialwissenschaft, Hrsg.: P. Klimanek, M. Seefeldt, Freiberger Forschungshefte B 295 Werkstoffwissenschaft, Werkstofftechnologie, S. 169-187 (1999).
209. E. Soppa, P. Doumalin, S. Schmauder, M. Bornert, "Numerische und experimentelle Untersuchungen der lokalen Verformungen in einem Ag/Ni-Verbundwerkstoff", in: XXVI. FEM-Kongreß Baden-Baden, 15./16. November, Hrsg.: A. Streckhardt, Kongressorganisation, Eningerloh, S. 443-449 (1999).
210. L. Mishnaevsky Jr., S. Schmauder, "Advanced Finite Element Techniques of Analysis of the Microstructure-Mechanical Properties Relationships in Heterogeneous Materials: A Review" (in Russian), Physical Mesome­chanics 2, pp. 5-22 (1999).
211. D. Dantz, Ch. Genzel, W. Reimers, U. Weber, S. Schmauder, "Analyse von Makro- und Mikroeigenspannungen in Gradientenwerkstoffen (FGM)", in: Verbundwerkstoffe und Wertkstoffverbunde, Hrsg.: K. Schulte und K.U. Kainer, Wiley-VCH, Wertheim, S. 704-709 (1999).
212. S. Lütze, O. Mintchev, S. Schmauder, G. Busse, "Spannungsoptik an Modellfaserproben. Ein Vergleich zwischen Experiment und Simulation", in: 16. Stuttgarter Kunststoff-Kolloquium, Stuttgart, 1999, S. 6.5/1-6.5/12. (1999).
213. H.-P. Maier, K. Maile, S. Lauf, S. Schmauder, T. Henke, W. Krenkel, A. Grainer, J. Bill, F. Aldinger, "Entwicklung von keramischen Bauteilen für die Anwendung im Hochtemperaturbereich von kohlebefeuerten Kraftwerken", Fortschrittsberichte der Deutschen Keramischen Gesellschaft,  Werkstoffe•Verfahren•Anwen­dung, Band 15, Heft 1, S. 249-270 (2000).
214. P. Leßle, M. Dong, E. Soppa, S. Schmauder, "Selbstkonsistente Matrizitätsmodelle zur Simulation des mechanischen Verhaltens von Verbundwerkstoffen", Proc. Tagung Gefüge und Bruch, 17.-19.03.99, Ruhr-Universität Bochum, Hrsg.: M. Pohl, Ruhr-Universität Bochum, Institut für Werkstoffe, Bochum, S. 29-39 (1999).
215. Y. Kang, E. Soppa, S. Schmauder, "Analysis of the Modeling of Stress and Strain Fields in a Real Microstructure using a Hybrid Method", ACTA Mechanic Solida Sinica, Vol. 15 (3), pp. 277-282 (2002).
216. U. Mayer, J. Ulmer, S. Schmauder, "Influence of Ultrasonic Vibration on Yield Properties of Steels with Respect to Forming Processes", Ultrasonics (submitted) (2001).
217. L. Mishnaevsky Jr., M. Dong, S. Hönle, S. Schmauder, "Computational mesomechanics of particle-reinforced composites", Computational Materials Science 16, pp. 133-143 (1999).
218. P. Leßle, M. Dong, S. Schmauder, "Self-Consistent Matricity Model to Simulate the Mechanical Behaviour of Interpenetrating Microstructures", Computational Materials Science 15, pp. 455-465 (1999).
219. S. Schmauder, U. Weber, "Modelling of Functionally Graded Materials by Numerical Homogenization", Arch. Appl. Mech. 71, pp. 182-192 (2001).
220. S. Schmauder, "Crack Growth in Multiphase Materials", Encyclopedia of Materials: Science and Technology, Elsevier Science Ltd., pp. 1735-1741 (2001).
221. I. Altpeter, G. Dobmann, K.-H. Katerbau, M. Schick, P. Binkele, P. Kizler, S. Schmauder, "Copper Precipitates in 15 NiCuMoNb 5 (WB 36) Steel, Material Properties and Microstructure, Atomistic Simulation, and Micromagnetic NDE Techniques", Nuclear Engineering and Design 206, pp. 337-350 (2001).
222. Y. Furuya, H. Noguchi and S. Schmauder, "Molecular Dynamics Study on Low Temperature Brittleness in Tungsten Single Crystals", Int. J. Fract. 107, pp. 139-158 (2001).
223. L. Mishnaevsky Jr., U. Weber, N. Lippmann, S. Schmauder, "Computational Experiment in the Mechanics of Materials", Proceeding TMS Conference "Computational Modeling of Materials, Minerals and Metals", San Diego, 23.-26. September 2001, pp. 673-680 (2001).
224. L. Mishnaevsky, N. Lippmann, S. Schmauder, "Computational modeling of crack propagation in real and artificial microstructures of tool steels", Int. J. Fract. 120, pp. 581-600 (2003).
225. C. Kohnle, O. Mintchev, D. Brunner, S. Schmauder, "Fracture of metal/ceramic interfaces", Computational Materials Science 19, pp. 261-266 (2000).
226. P. Binkele, S. Schmauder, "Computersimulation der Ostwaldreifung von Cu-Ausscheidungen in Reaktor­stählen und deren schädigungsmechanische Auswirkung", Workshop Kompetenzerhaltung in der Kerntechnik – Abstracts, Ausarbeitungen, Viewgraphs, Jahrestagung Kerntechnik '99, 20. Mai 1999, Karlsruhe (1999).
227. Ye.Ye. Deryugin, G.V. Lasko, S. Schmauder, "Modelling and simulation of the localized plastic deformation by relaxation element method”, Comput. Mech. 40, pp. 791-801 (2007).
228. S. Schmauder, E. Soppa, U. Weber, "Computersimulationen der Verformung von Metall/Keramik-Verbundwerkstoffen", MPA-Nachrichten Nr. 03/2000, S. 2-4 (2000).
229. P. Binkele, S. Schmauder, "An atomistic Monte Carlo simulation of precipitation in a binary system", Z. Metallkunde 94, pp. 1-6 (2003).
230. Z. Li, S. Schmauder, "Phase-stress partition and residual stress in metal matrix composites", Computational Materials Science 18, pp. 295-302 (2000).
231. P. Kizler, S. Nedelcu, S. Schmauder, N. Moldovan, "Atomic Scale Modelling of Dislocation/Obstacle Inter­action in α-Fe", National Institute of Standards and Technology, Gaithersburgh, USA, June 19-22, p. 2.P.25 (2000).
232. D. Uhlmann, S. Schmauder, G. Zies, "Experimentelle und numerische Untersuchungen zu zwei Werkstoff­zuständen des Werkstoffs 15 NiCuMoNb 5 (WB36)", 26. MPA-Seminar, 5. und 6. Oktober (2000) Universität Stuttgart, Hrsg.: Staatliche Materialprüfungsanstalt (MPA) Universität Stuttgart, S. 36.1-36.27 (2000).
233. S. Schmauder, P. Kizler, D. Uhlmann, "Zur Bedeutung von Mikroeigenspannungen in Cu-haltigen Stählen", MPA-Nachrichten 04+05/2001, S. 5-6 (2001).
234. S. Schmauder, "Erweiterung der Formgebungsgrenzen bei Umformprozessen", MPA-Nachrichten 04+05, S. 13 (2001).
235. S. Schmauder, U. Weber, E. Soppa, "Simulation of the Mechanical Behaviour of Ductile Matrix Composites", Symposium on Structured Media in Memory of Prof. Ekkehart Kröner, Posen/Poland, 16.-21.09.2001 (Proceedings of the International Symposium TRECOP`01), pp. 232-244 (2001).
236. Or. Mintchev, S. Schmauder, U. Weber, "Finite Element Simulation of Crack Initiation and Growth Based on a Critical Criterion: – Some Examples –", Proceedings of an International Workshop on Nonlocal Modelling of Failure of Materials, June 25-27, 2007, University of Wuppertal (Germany), pp. 73-82 (2007).
237. G.V. Lasko, Ye.Ye. Deryugin, S. Schmauder, "Simulation of Plastic Deformation Localization in Composite Materials with Hard Inclusions", Computational Materials Science 26, pp. 20-27 (2003).
238. C. English, F. Sevini, J-M. Frund, R. Langer, J. Cowan, F. Gillemot, M. Brumovsky, P. Nenonen, A. Ballesteros, S. Schmauder, D. Bacon "Phosphorus Influence on Steel Ageing (Pisa)" Proceedings PISA-FISA-2001, EU Research in Reactor Safety, November 12-14, 2001, EC Luxembourg, Eds.: G. Von Goethem, A. Zurita, J. Martin Bermejo, P. Manolatos and H. Bischoff, EUR 20281 EN, pp. 54-60 (2001).
239. L. Mishnaevsky Jr, N. Lippmann, S. Schmauder, "Mesomechanical Simulation of Crack Propagation in Real and Quasi Idealized Microstructures of Tool Steels", Proceedings Materials Week, 13th European Conference of Fracture, CD-ROM (2000).
240. I.Y. Smolin, E. Soppa, S. Schmauder, P.V. Makarov, "Two-dimensional simulation of mesolevel plastic deformation in the matrix of a cermet composite: evaluation of the stress states and calculation methods", Phys. Mesomechanics 3, pp. 17-21 (2000).
241. E. Soppa, P. Doumalin, P. Binkele, T. Wiesendanger, M. Bornert, S. Schmauder, "Experimental and numerical characterisation of in-plane deformation in two-phase materials", Computational Materials Science 21, 261-275 (2001).
242. F. Otremba, S. Schmauder, "Simulation werkstoffmechanischer Phänomene in Werkstoffen, Bauteilen und Anlagen", MPA-Nachrichten 04+05, S. 1 (2001).
243. C. Kohnle, O. Mintchev, S. Schmauder, D. Brunner, "Fracture of Metal/Ceramic Interfaces", Proceedings Materials Week,  25.-28. September 2000, Munich, Germany http://www.materialsweek.org/proceedings (2000).
244. L. Mishnaevsky Jr, S. Schmauder, "Continuum Mesomechanical Finite Element Modeling in Materials Development: A State-of-The-Art Review" (in Chinese), Advances in Mechanics (China) 32, pp. 444-466 (2002).
245. L. Mishnaevsky Jr, S. Schmauder, "Continuum mesomechanical finite element modeling in materials development: A state-of-the-art review", Appl. Mech. Rev.  54, pp. 49-67 (2001).
246. Z. Li, S. Schmauder and A. Wanner, "Influence of Elastic Inclusion Morphology and Matrix Hardening Behaviour on Bauschinger Effect in Metal Matrix Composites", Metallurgical and Materials Transactions 31A, pp. 2943-2948 (2000).
247. G.V. Lasko, Ye.Ye. Deryugin, S. Schmauder, D. Saraev, "Application of the relaxation element method to some problems of stress-strain calculations of solids on mesolevel", Computational Materials Science 19, pp. 35-44 (2000).
248. P. Binkele, S. Schmauder, "Atomistische Computersimulation der Bildung von Kupferausscheidungen in Reaktor­stählen", Workshop 'Kompetenzerhaltung in der Kerntechnik', Bonn, 25.05.2000 (2002).
249. D. Saraev, S. Schmauder, "Finite element modelling of Al/SiCp metal matrix composites with particles aligned in stripes - a 2D-3D comparison", Int. J. Plasticity 19, pp. 733-747 (2003).
250. C. Kohnle, O. Mintchev, S. Schmauder, "Elastic and Plastic Fracture Energies of Metal/Ceramic Joints", Computational Materials Science 25, pp. 272-277 (2002).
251. P.V. Makarov, S. Schmauder, O.I. Cherepanov, I.Yu. Smolin, V.A. Romanova, R.R. Balokhonov, D.Yu. Saraev, E. Soppa, P. Kizler, G. Fischer, S. Hu, M. Ludwig, "Simulation of elastic-plastic deformation and fracture of materials at micro-, meso- and macrolevels", Theoretical and Applied Fracture Mechanics 37, pp. 183-244 (2001).
252. L. Mishnaevsky Jr., N. Lippmann and S. Schmauder, "Experimental-Numerical Analysis of Mechanisms of Damage Initiation in Tool Steels", Proceedings 10th International Conference Fracture, 3-7 Dec. 2001, Honolulu, USA, CD-ROM (2001).
253. S. Schmauder, "Computational Mechanics", Annual Rev. Mater. Res. 32, pp. 437-465 (2002).
254. Ye.Ye. Deryugin, V.E. Panin, I.V. Storzhenko, S. Schmauder, "Meso- and Macroeffects of Deformation Localization in Dispersion Hardened Aluminium composites with Al2O3 Inclusions", Proceedings International Conference MESOMECHANICS MESO2002, Aalborg University, August 26-30, 2002, Denmark, Eds.: R. Pyrz, J. Schjodt-Thomsen, J.C. Rauhe, T. Thomsen and L.R. Jensen, pp. 57-65 (2002).
255. S. Schmauder, D. Uhlmann, G. Zies, "Experimental and numerical investigations of two material states of the material 15 NiCuMoNb (WB 36)", Computational Materials Science  25, pp. 174-192 (2002).
256. Ye.Ye. Deryugin, G.V. Lasko, S. Schmauder, "Field of Stresses in an Isotropic Plane with Circular Inclusion under Tensile Stress", Theor. Appl. Fract. Mech. (submitted) (2002).
257. S. Schmauder, P. Binkele, "Atomistic Computer Simulation of the Formation of Cu-Precipitates in Steels", Computational Materials Science 24, pp. 42-53 (2002).
258. S. Schmauder, U. Weber, E. Soppa, "Computational Mechanics of Heterogeneous Materials: Influence of Residual Stresses", Proceedings IUTAM Symposium on Computational Mechanics of Solid Materials at Large Strains, Ed.: C. Miehe, Kluwer Academic Publishers, Dordrecht, The Netherlands, pp. 321-330 (2003).
259. P. Binkele, S. Schmauder, "Atomistische Computersimulation der Bildung von Kupferausscheidungen in Reaktorstählen", ‘Workshop Kompetenzerhaltung in der Kerntechnik‘, Stuttgart, 16.05.2002 (2002).
260. S. Schmauder "Rissbildung in Metallmatrix-Verbundwerkstoffen", 7. Tagung Gefüge und Bruch, Montan­universität Leoben, 10.-12. April 2002, Montanuniversität Leoben (Austria), Tagungsband, Institut für Werk­stoffe, Ruhr-Universität Bochum, Eds.: A. Börger, R. Danzer, T. Lube, H. Prilling, S. 100-102 (2002).
261. D. Saraev, S. Schmauder, "Atomic-scale simulations of the interaction between dislocations and tilt grain boundaries in α-iron", phys. stat. sol. (b) 240, pp. 81-90 (2003).
262. S. Joshi, A. Mukherjee, S. Schmauder, "Numerical Characterization of Functionally Graded Active Materials Under Electrical and Thermal Fields", Smart Materials and Structures 12, pp. 571-579 (2003).
263. W. Gaudig, R. Mellert, U. Weber, S. Schmauder, "Self-Consistent One-Particle 3D Unit Cell Model for Simulation of the Effect of Graphite Aspect Ratio on Young´s Modulus of Cast-Iron", Computational Materials Science 28, pp. 654-662 (2003).
264. G. Lasko, Y. Deryugin, S. Schmauder, "Simulation of Plastic Strain Localization in Polycrystals", Abstracts for the 14th US National Congress of Theoretical and Applied Mechanics, Virginia Polytechnic Institute and State University Blacksburg, VA, USA, ISBN 0-9721257-0-1, p. 576 (2002).
265. L. Mishnaevsky Jr., N. Lippmann, S. Schmauder, "Computational Design of Multiphase Materials at the Mesolevel", Proceedings of ASME IMECE 2001: International Mechanical Engineering Congress and Exposition, November 11-16, 2001, New York, CD-ROM, Vol. 2, pp. 1-11 (2002).
266. L. Mishnaevsky Jr., N. Lippmann, S. Schmauder, "Micromechanisms and Modelling of Crack Initiation and Growth in Tool  Steels: Role of Primary Carbides", Z. Metallkunde 94, pp. 676-681 (2003).
267. V. Klimenov, S.V. Panin, R.R. Balokhonov, O. Nekhoroshkov, V.I. Kuzmin, Zh. G. Kovalevskaya, S. Schmauder, "Experimental and theoretical investigations of mesoscopic deformation and fracture of compressed mild-steel specimens with sprayed coatings fused under powerful ultrasonic vibrations", (in Russian), Phys. Mesomechanics 6, pp. 99-110 (2003).
268. E. Soppa, S. Schmauder, G. Fischer, J. Brollo, U. Weber, "Deformation and Damage in Al/Al2O3", Compu­tational Materials Science 28, pp. 574-586 (2003).
269. S. Schmauder, M. Kuna, Foreword IWCMM11, CMS, Computational Materials Science 26, ix (2003).
270. S. Schmauder, "Micromechanical Simulation of Composites", Chapter 30 in: Continuum Scale Simulation of Engineering Materials: Fundamentals – Microstructures – Process Applications, Eds.: D. Raabe, F. Roters, F. Barlat, L.-Q. Chen, WILEY-VCH Verlag GmbH & Co. KgaA, Weinheim, pp. 589-606 (2004).
271. Sh. Joshi, A. Mukherjee, S. Schmauder, "Exact Solutions for Characterization of Electro-Elastically Graded Materials", Computational Materials Science 28, pp. 548-555 (2003).
272. Ye.Ye. Deryugin, V.E. Panin, S. Schmauder, E. Soppa, "The effects of macrolocalization of deformation in Al-based composites with Al2O3 inclusions", Fatigue Fract. Engng. Mater. Struc. 26, pp. 295-304 (2003).
273. R.R. Balokhonov, V.A. Romanova, S. Schmauder, P.V. Makarov, "Simulation of meso-macro dynamic behavior using steel as an example", Computational Materials Science 28, pp. 505-511 (2003).
274. M.E. Evard, A.E. Volkov, S.J. Lauf, S. Schmauder, "Simulation by the structure-analytical model of ultrasonic vibrations effect on steel St37 stress-strain diagrams", XXVIII Conf. Actual Poblems of Strength, Kiev, Ukraine, July 3-5, 2001, Computational Materials Science (submitted) (2001).
275. R.R. Balokhonov, S.V. Panin, V.A. Romanova, S. Schmauder, P.V. Makarov, "Numerical Simulation of Defor­mation and Fracture in Low-Carbon Steel Coated by Diffusion Borating", Theor. Appl. Fract. Mech. 41, pp. 9-14 (2004).
276. V. Petrova, S. Schmauder "Mathematical Modelling and Thermal Stress Intensity Factors Evaluation for an Interface Crack in the Presence of a System of Cracks in Functionally Graded/Homogeneous Bimaterials", Computational Materials Science 52, pp. 171-177 (2012).
277. K. Zhu, S. Schmauder, R. Stößel, S. Predak, G. Busse, W. Lutz, "The failure properties of short fiber reinforced com­posites with polymer matrix with consideration of the fiber/matrix-debonding", Proceedings 4th Interna­tional Conference on Physical and Numerical Simulation of Materials Processing, May 17-21, 2004, Shanghai, CD-ROM (2004).
278. K. Zhu, S. Schmauder, "Prediction of the failure properties of short fiber reinforced composites with metal and polymer matrix", Computational Materials Science 28, pp. 743-748 (2003).
279. K. Zhu, S. Schmauder, "Simulation of the failure process of short fiber reinforced composites", Eng. Fract. Mech. (submitted) (2003).
280. V. Romanova, R. Balokhonov, P. Makarov, S. Schmauder, E. Soppa, "Simulation of elasto-plastic behaviour of an artificial 3D-structure under dynamic loading", Computational Materials Science 28, pp. 518-528 (2003).
281. G.V. Lasko, Ye.Ye. Deryugin, S. Schmauder, "Simulation of the Evolution of band Structures in Polycrystals on the Basis of Relaxation Element Method and Cellular Automata", Proceedings of the Seventh International Conference Cellular Automata for Research and Industry, ACRI 2006, September 20-23, 2006, Perpignan, France, Eds.: S. El Yacoubi, B. Chopard, S. Bandini, Lecture Notes in Computer Science  4173/2006, Springer-Verlag, Berlin Heidelberg, pp. 367-372 (2006).
282. E. Soppa, U. Weber, S. Schmauder, G. Fischer, "Spannungs- und Dehnungskonzentrationen in Al/Al2O3-Verbundwerkstoffen verursacht durch Schädigungsprozesse", Verbundwerkstoffe 14. Symposium Verbund­werkstoffe und Werkstoffverbunde, Hrsg.: H.-P. Degischer, Technische Universität Wien, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, S. 581-586 (2003).
283. E. Roos, J. Föhl, K.-H. Katerbau, D. Willer, P. Binkele, P. Kizler, S. Schmauder, "Untersuchungen zur Bildung und Auflösung von Kupferausscheidungen im Werkstoff 15NiCuMoNb5 (WB 36) Folgerungen für die sicher­heitstechnische Bewertung", 2. Workshop Kompetenzverbund Kerntechnik, Köln, 18.-19. September 2002, S. 1-3-1-14 (2002).
284. E.E. Deryugin, V.E. Panin, S. Schmauder, and I.V. Storozhenko, "Effects of deformation localization in Al-based composites with Al2O3 inclusions", Phys. Mesomechanics 4, pp. 35-47 (2001).
285. V.A. Klimenov, S.V. Panin, R.R. Balokhonov, O.N. Nekhoroshkov, V.I. Kuzmin, Zh.G. Kovalevskaya, S. Schmauder, "Experimental and theoretical study of mesoscopic deformation and fracture of compressed low-carbon steel specimens with sprayed coatings fused under powerful ultrasonic vibrations", (in Russian), Phys. Meso­mechanics 6, pp. 99-110 (2003).
286. Ye.Ye. Deryugin, S. Schmauder, I.V. Storozhenko, "Macroeffects of deformation localization on the basis of Al with inclusions Al2O3", (in Russian), Proceedings International Workshop on „Actual Problems of Strength“, 26-29 September 2000, Vitebsk, Belrussia, pp. 280-286 (2000).
287. P. Binkele, S. Schmauder, "Atomistische Computersimulation der Bildung von CuMnNi-Ausscheidungen in Reaktor­stählen", 3. Workshop Kompetenzverbund Kerntechnik, Stuttgart, 08.10.2003, 23 p., CD-ROM (2003).
288. U. Weber, S. Schmauder, D. Saraev, P. Deimel, E. Sattler, E. Soppa, "Einfluss unterschiedlich großer Aus­scheidungen bzw. von Wasserstoff auf das Verformungsverhalten kraftwerksrelevanter Stähle", 3. Workshop Kompetenzverbund Kerntechnik, Stuttgart, 08.10.2003, 22 p., CD-ROM (2003).
289. R. Balokhonov, V. Romanova, S. Schmauder, "Numerical Simulation of intermittent Yielding at the Macro and Mesolevels", Computational Materials Science 32, pp. 261-267 (2005).
290. V. Romanova, R.  Balokhonov, E. Soppa, S. Schmauder, P. Makarov, "Simulation for elasto-plastic behavior of artificial 3D-structure under shock wave loading", J. Phys. IV France 110, pp. 251-256 (2003).
291. S. Schmauder, U. Weber, E. Soppa, "Computational Micromechanics of heterogeneous Materials", Key Eng. Mater. 251-252, pp. 415-1-422 (2003).
292. L. Mishnaevsky Jr., N. Lippmann, S. Schmauder, "Computational modeling of crack propagation in real microstructures of steels and virtual testing of artificially designed materials", Int. J. Fract. 120, pp. 581-600 (2003).
293. G. Lasko, D. Saraev, S. Schmauder, P. Kizler, "Atomic-scale simulations of the interaction between a moving dislocation and a bcc/fcc phase boundary", Computational Materials Science 32, pp. 418-425 (2005).
294. S. Schmauder, D. Gross, H. Baaser, Preface IWCMM12, Computational Materials Science 28, IX (2003).
295. U. Weber, A. Mohanta, S. Schmauder, "Numerical Determination of Parameterised Failure Curves for Ductile Structural Materials", Int. J. Mat. Research 98, pp.1071 - 1080 (2007).
296. L. Mishnaevsky Jr., U. Weber, S. Schmauder, "Numerical analysis of the effect of microstructures of particle-reinforced metallic materials on the crack growth and fracture resistance", Int. J. Fract. 125, pp. 33-50 (2004).
297. R.R. Balokhonov, V.A. Romanova, S. Schmauder, P.V. Makarov, "Simulation of periodical shear band pro­pagation in aluminum alloys at the mesoscale", Proceedings of the Sixth International Conference for Mesome­chanics, May 31 - June 4, 2004, Patras, Greece, Eds.: G.C. Sih, Th.B. Kermanidis, Sp.G. Pantelakis, Laboratory of Technology and Strength of Materials, Department of Mechanical Engineering and Aeronau­tics, Uni­versity of Patras, Greece, pp. 45-48 (2004).
298. E.A. Soppa, S. Schmauder, G. Fischer, "Particle cracking and debonding criteria in Al/Al2O3 composites", Proceedings of the Sixth International Conference for Mesomechanics, May 31 - June 4, 2004, Patras, Greece, Eds.: G.C. Sih, Th.B. Kermanidis, Sp.G. Pantelakis, Laboratory of Technology and Strength of Mate­rials, Depart­ment of Mechanical Engineering and Aeronautics, University of Patras, Greece, pp. 312-317 (2004).
299. P. Binkele, P. Kizler, S. Schmauder, "Atomistic Monte Carlo simulations of the diffusion of P and C near grain boundaries in bcc iron", 30th MPA-Seminar in conjunction with the 9th German-Japanese Seminar, October 6 and 7, 2004, Stuttgart, Staatliche Materialprüfungsanstalt (MPA) Universität Stuttgart, ISSN 0722-401X, pp. 25-1-25-22 (2004).
300. A. Bertram, T. Böhlke, S. Schmauder, Foreword IWCMM13, Computational Materials Science 32, p. 251 (2005).
301. C. Kohler, P. Kizler, S. Schmauder, "Atomistic simulation of precipitation hardening in a-iron: influence of precipitate shape and chemical composition", Modell. Simul. Mater. Sci. Eng. 13, pp. 35-45 (2005).
302. I.Y. Smolin, S. Schmauder, P.V. Makarov, E. Soppa, "Modeling of mechanical behavior of materials with sub­microcrystalline nanostructures in the frameworks of Cosserat media", (submitted) (2005).
303. G. Lasko, Y.Y. Deryugin, S. Schmauder, "Plastic Deformation Development in Polycrystals Based on the Cel­lular Automata and Relaxation Element Method", Proceedings of the Sixth International Conference on Cellular Automata for Research and Industry, ACRI 2004, October 25-27, 2004, Amsterdam, The Netherlands, Eds.: P.M.A. Sloot, B. Chopard, A.G. Hoekstra, Lecture Notes in Computer Science 3305/2004, Springer-Verlag, Berlin Heidelberg, pp. 375-384 (2004).
304. U. Weber, P. Deimel, D. Saraev, E. Sattler, S. Schmauder, E. Soppa, "Influence of hydrogen on the deforma­tion behaviour of a ferritic fine-grained low alloy steel", Computational Materials Science 32, pp. 577-587 (2005).
305. R.R. Balokhonov, V.A. Romanova, S. Schmauder, "Computational analysis of deformation and fracture in a composite material on the mesoscale level", Computational Materials Science 37, pp. 110-118 (2006).
306. V.A. Romanova, R.R. Balokhonov, P.V. Makarov, S.J. Lauf, U. Mayer,  S. Schmauder, "Numerical modelling of steel behaviour under tension coupled with ultrasonic vibration", (in Russian), Modeling of processes in sinergetic systems, Tomsk State University Press, pp. 128-130 (2002).
307. W. Lutz, G. Lasko, S. Schmauder, S. Predak, O. Bullinger, H. Gerhard, G. Busse, "Spritzgieß-Simulation eines glasfaserverstärkten Formteils mit Bindenaht zur Berechnung von Faserorientierung und resultierenden me­chanischen Eigenschaften", 19. Stuttgarter Kunststoffkolloquium, 9.-10. März 2005, Tagungsband 4/V5, S. 1-10 (2005).
308. G. Tursun, U. Weber, E. Soppa, S. Schmauder, "The Influence of Transition Phases on the Damage Behaviour of an Al/10vol.% SiC Composite", Computational Materials Science 37, pp. 119-133 (2006).
309. C. English, F. Sevini, J.-M. Frund, R. Langer, A. Donaldson, F. Gillemot, M. Brumovsky, P. Nenonen, A. Balle­steros, S. Schmauder, D. Bacon, "Phosphorus Influence on Steel Ageing (PISA)", Proceedings FISA 2003, EU research in reactor safety, November 10-13, 2003, EC Luxembourg, Eds.: G. Van Goethem, A. Zurita, S. Casalta, P. Manolatos, EUR 21026, pp. 107-112 (2004).
310. C. Kohler, P. Kizler, S. Schmauder, "Atomistic simulation of the pinning of edge dislocations in Ni by Ni3Al precipitates", Mat. Sci. Eng. A 400-401, pp. 481-484 (2005).
311. V.A. Romanova, E. Soppa, S. Schmauder, R.R. Balokhonov, "Mesomechanical analysis of the ELASTO-PLAS­TIC behavior of a 3D composite-structure under tension", Comp. Mech. 36, pp. 475-483 (2005).
312. A. Siddiq, S. Schmauder, "Modelling of Crystal Plasticity Effects on the Crack Initiation Energies of a Bi-Crystal Interface (Nb/Al2O3) ", CAMES 14, pp. 67-78 (2007).
313. W. Sekkal, A. Zaoui, S. Schmauder, "Nanoindentation study of the superlattice hardening effect at TiC(110)/­NbC(110) interfaces", Appl. Phys. Lett. 86, pp. 163108 1-3 (2005).
314. G. Lasko, P. Hähner, S. Schmauder, "Finite Element Simulation of the Portevin – Le Chatelier Effect", Model­l. Simul. Mater. Sci. Eng. 13, pp. 645-656 (2005).
315. S. Schmauder, U. Weber, E. Soppa, "Mikrostrukturelle Modellierung zum Einfluß der Eigenspannungsentwicklung auf die Schädigung bei der Kaltmassivumformung mehrphasiger Werkstoffe", Abschlußbericht zum DFG-Schwerpunktprogramm 1074, Hrsg.: R. Kopp, Druck und Verlagshaus Mainz GmbH Aachen, S. 66-75 (2005).
316. (Fehlt) R. Samadhiya, A. Mukherjee, S. Schmauder, "Material characterization and stress wave management through graded media", Computational Materials Science (accepted) (2005).
317. M.R. Kabir, W. Lutz, K. Zhu, S. Schmauder, "Fatique modeling of short fiber reinforced composites with duc­tile matrix under cyclic loading", Computational Materials Science 36, pp. 361-366 (2006).
318. A. Siddiq, S. Schmauder, "Simulation of hardening in high purity niobium single crystals during deforma­tion", STEEL GRIPS 3, pp. 281-286 (2005).
319. W. Lutz, T. Rahman, S. Schmauder, R. Finn, S. Aicher, "Simulation cellulosefaserverstärkter Gips-Verbund­werkstoffe", 6. Leipziger Fachtagung „Innovationen im Bauwesen – Faserverbundwerkstoffe“, 1.-2. Dezember 2005, Leipzig, Eds.: F. Dehn, K. Holschemacher, T. Nguyen Viet, Bauwerk Verlag GmbH Berlin, S. 273-288 (2005).
320. T. Rahman, W. Lutz, R. Finn, S. Schmauder, S. Aicher, "Simulation of  the mechanical behavior and damage in components made of strain softening cellulose fiber reinforced gypsum materials", Computational Materials Science 39, pp. 65-74 (2007).
321. P. Kizler, S. Schmauder, "Simulation of the nanoindentation of hard metal carbide layer systems – The Case of Nanostruc­tured Ultra-Hard Carbide Layer Systems", Computational Materials Science 39, pp. 205-213 (2007).
322. P. Kizler, C. Kohler, P. Binkele, D. Willer, T. Al-Kassab, S. Schmauder, "Nanosimulation of Precipitate Streng­thening in Steel, Based on Atomic-Scale Characterization of Structure and Order of Precipitates", 31. MPA-Seminar in Verbindung mit der Fachtagung “Werkstoff- & Bauteilverhalten in der Energie- & Anlagentechnik“, Stutt­gart, 13.-14. Oktober 2005, pp. 26.1-26.19, CD-ROM, ISSN-Nr. 1861-5414 (2005).
323. I.-H. You, W. Lutz, H. Gerger, A. Siddiq, A. Brendel, S. Schmauder, "Dynamic fiber push-out study of a copper matrix composite: Experiment simulation based on cohesive finite elements", Int. J. Solids Struct. (submitted) (2008).
324. E. Roos, H.-P. Seebich, M. Seidenfuss, S. Schmauder, P. Kizler, "Effect of variation of microstructure on frac­ture mechanics parameters", 3. Indo-German Seminar on Advances in Structural Integrity & Safety, Nov. 15-17, Bombay, Indien, pp. 1-36 (2005).
325. A. Mukherjee, S. Schmauder, Foreword IWCMM14, Computational Materials Science 37, ix (2006).
326. G. Cailletaud, S. Forest, S. Schmauder, Preface IWCMM17, Computational Materials Science 45, XI (2009).
327. A. Siddiq, S. Schmauder, Y. Huang, "Fracture of bicrystal metal/ceramic interfaces: A study via the mecha­nism-based strain gradient crystal plasticity theory", Int. J. Plasticity 23, pp. 665-689 (2007).
328. A. Siddiq, S. Schmauder, "Interface fracture analyses of a bicrystal niobium/alumina specimen using cohe­sive modelling approach", Modell. Simul. Mater. Sci. Eng. 14, pp. 1015-1030 (2006).
329. W. Lutz, K. Zhu, S. Schmauder, "FEM-Modeling of acoustic emission in short fiber reinforced composites", Chapter 3.1 in: Damage and its evolution in fiber-composite materials: simulation and non-destructive testing, Eds.: G. Busse, B.H. Kröplin, F. Wittel, Stuttgart, ISBN 3-930683-90-3, pp. 297-310 (2006).
330. H.M. Deuschle, W. Lutz, H. Gerger, S. Schmauder, "Simulation of photoelasticity in a glass fiber polymer ma­trix composite", Chapter 3.2 in: Damage and its evolution in fiber-composite materials: simulation and non-des­tructive testing, Eds.: G. Busse, B.H. Kröplin, F. Wittel, Stuttgart, ISBN 3-930683-90-3, pp. 311-321 (2006).
331. W. Lutz, M. Dong, K. Zhu, S. Schmauder, "Modeling of damage in fiber and particle reinforced composites", Chapter 4.1 in: Damage and its evolution in fiber-composite materials: simulation and non-destructive testing, Eds.: G. Busse, B.H. Kröplin, F. Wittel, Stuttgart, ISBN 3-930683-90-3, pp. 325-359 (2006).
332. R. Samadhiya, A. Mukherjee, S. Schmauder, "Characterization of discretely graded materials using acoustic wave propagation", Computational Materials Science 37, pp. 20-28 (2006).
333. I.Y. Smolin, S. Schmauder, P.V. Makarov, R.A. Bakeyev, "A Micropolar Framework for Modeling Mechanical Behavior at the Mesoscale with Taking into Account Microstructure Evolution", Mathematical methods for bridging length and time scales,  pp. 112-115  (2006).
334. H.-A. Crostack, J. Nellesen, G. Fischer, S. Schmauder, U. Weber, F. Beckmann, "Tomographic Analysis and FE-Simulations of MMC-Microstructures under Load", Progress in Biomedical Optics and Imaging - Proceedings of SPIE 6318, pp. 63181A-1-63181A-12 (2006).
335. Y.Y. Deryugin, G.V. Lasko, S. Schmauder, "Modelling of Mesomechanics of Portevin-Le Chatelier Effect by Relaxation Element Method", Proceedings of ICCES 07, pp. 1707-1713 (2007).
336. F. Roters, S. Schmauder, Foreword IWCMM15, Computational Materials Science 39, xi (2007).
337. V. Romanova, R. Balokhonov, E. Soppa, S. Schmauder, "Comparative Analysis of Two- and Three-Dimen­sional Simulations of Al/Al2O3 Behavior on the Meso-Scale Level", Computational Materials Science 39, pp. 274-281 (2007).
338. W. Lutz, H. Gerger, S. Schmauder, "Modellierung der Schädigungsentwicklung eines faserverstärkten Werk­stoffs mit thermoplastischer Matrix", 20. Stuttgarter Kunststoff-Kolloquium, 14.-15. März 2007, Stuttgart, Tagungsband 3/V7, Eds.: H.-G. Fritz, C.D. Eisenbach, IKT, IPOC, Universität Stuttgart, S. 1-12 (2007).
339. P. Binkele, P. Kizler, S. Schmauder, "Atomistic Kinetic Monte Carlo Simulations of Segregation of Phosphorus and Carbon at Grain Boundaries in bcc-Iron", Computational Materials Science (submitted) (2007).
340. T. Sadowski, S. Schmauder, Foreword IMCMM16, Computational Materials Science xxx (2007).
341. A. Siddiq, S. Schmauder, M. Ruehle, "Niobium/alumina bicrystal interface fracture: A theoretical interlink between local adhesion capa­city and macroscopic fracture energies", Eng. Fract. Mech 75, pp. 2320-2332 (2008).
342. W. Lutz, J. Herrmann, M. Kockelmann, H.S. Hosseini, A. Jäckel, S. Schmauder, S. Predak, G. Busse, "Damage development in short fiber reinforced injection molded composites", Computational Materials Science 45, pp. 698-708 (2009).
343. S.S. Khan, N. Hort, E. Subasic, S. Schmauder, "Fluidity of Magnesium alloys, an Experimental & Numerical approach", Proceedings of 10th Asian Foundry Congress (AFC-10), May 21-24, 2008, Nagoya, Japan, pp. 329-334, CD-ROM (2008).
344. S.S. Khan, N. Hort, I. Steinbach, S. Schmauder, "Castability of Magnesium Alloys", Magnesium Technology 2008, Eds.: M.O. Pekguleryuz, N.R. Neelameggham, R.S. Beals, E.A. Nyberg (2008).
345. Y. Deryugin, V.E. Panin, V.I. Suvorov, G.V. Lasko, S. Schmauder, "Influence of stress macroconcentrators on the strain localization in Al6061/Al2O3 composites", Aluminum Alloys: Fabrication, Characterization and Applications, TMS (The Minerals, Metals & Materials Society), 2008, Eds.: Y. Weimin, K. Subodh, pp. 41-47 (2008).
346. G.V. Lasko, Y.Y. Deryugin, S. Schmauder, "Simulation of PLC-Effects in Al6061/Al2O3 Alloys", TMS (The Minerals, Metals & Materials Society), 2008, Eds.: W. Yin, K. Subodh, 2008, Ernest Morial Convention Center, New Orleans, USA, March 9-13, 2008, Aluminum Alloys: Fabrication, Characterization and Applications, pp. 131-137 (2008).
347. Y.Y. Deryugin, G.V. Lasko, S. Schmauder, "Simulation of the effect of intermittent flow in polycrystals on the basis of cellular automata and relaxation element method", Proceedings of the Eight International Conference Celullar Automata for Research and Industry, ACRI 2008, September 23-26, 2008, Yokohama, Japan, Eds.: H. Umeo et al., Lecture Notes in Computer Science 5191/2008, Springer-Verlag, Berlin Heidelberg, pp. 268-273, CD-ROM (2008).
348. V. Petrova, S. Schmauder, "Thermal Fracture of a FGM/Homogeneous Bimaterial with Defects", 17th Euro­pean Conference on Fracture "Multilevel Approach to Fracture of Materials, Components and Structures", September 2-5, 2008, Brno, Czech Republic, pp. 1808-1815, CD-ROM (2008).
349. V.A. Romanova, R.R. Balokhonov, S. Schmauder, "The influence of the reinforcing particle shape and inter­face strength on the fracture behavior of a metal matrix composite", Acta Materialia 57 pp. 97-107 (2009).
350. A. Siddiq, S. Schmauder, "Multiscale simulation of metal/ceramic interface fracture", IUTAM Symposium on Multi-Functional Material and Systems”, December 10-13, 2008, Bangalore, India (accepted) (2008).
351. C. Ziebert, J. Ye, S. Ulrich, A. Prskalo, S. Schmauder, "Sputter deposition of nanocrystalline ß-SiC films and molecular dynamics simulations of the sputter process“, J. Nanoscience and Nanotechnology 10, pp. 1-9  (2008).
352. H.-A. Crostack, J. Nellesen, G. Fischer, U. Weber, S. Schmauder, F. Beckmann, "Three-dimensional analysis of MMC microstructure and deformation by µcT and FE simulations“, Proceedings of SPIE – The International Society for Optional Engineering 7078, (submitted) (2008).
353. S.V. Eremeev, S. Schmauder , S. Hocker, S.E. Kulkova, "Investigation of the electronic structure of Me / Al2O3 (0001) interfaces”, Physika B 404, pp. 2065-2071 (2009).
354. S. Schmauder, "Simulation  als  Instrument  der  Werkstoffentwicklung”,  Metall 63, pp. 295-297 (2009).
355. A. Siddiq, S. Schmauder, "Crystal plasticity parameter identification procedure for single crystalline materi­al during deformation", Journ. of Computational and Applied Mechanics 7, No.1, pp. 1-15 (2006).
356. S.S. Khan, N. Hort, J. Eiken, I. Steinbach, S. Schmauder, "Numerical Determination of Heat Distribution and Castability Simulations of as Cast Mg-Al-Alloy", Adv. Eng. Mater. 11, S. 162-168 (2009).
357. S.V. Eremeev, S. Schmauder, S. Hocker, S.E. Kulkova, "Ab-initio investigation of Ni (Fe)/ZrO2 (001) and Ni-Fe/ZrO2 (001) interfaces", Surface Science 603, pp. 2218-2225 (2009).
358. A.P. Prskalo, S. Schmauder , C. Ziebert, J. Ye, S. Ulrich, "Molecular dynamics simulations of the sputtering of SiC and Si3N4", Surf. Coat. Tech. 204, pp. 2081-2084 (2010).
359. H. Yuan, G. Hu, S. Schmauder, Preface, Computational Materials Science 46, p. vii (2009).
360. R.R. Balokhonov, V.A. Romanova, S. Schmauder, "Finite-element and finite-difference simulations of the mechanical behavior of austenitic steels at different strain rates and temperatures", Mech. Mater. 41, pp. 1277-1287 (2009).
361. J. Huang, U. Weber, S. Schmauder, S. Geier, "Micromechanical Modelling of Young' s Modulus of semi crystalline Nylon 6 (PA 6) and copylomer particle-modified Nylon 6", The 19th International Workshop on Computational Mechanics of Materials, 1-4 September, 2009, Constanta, Rumänien, Ovidius University Press, ISBN 978-973-614-509-4, pp. 129-130 (2009).
362. J. Huang, U. Weber, S. Schmauder, S. Geier, "Micro-mechanical modelling of Young' s modulus of semi-crystalline polyamide 6 (PA 6) and elastomer particle-modified-PA 6", Computational Materials Science 50, pp. 1315-1319 (2011).
363. S. Hocker, S. Schmauder, P. Kumar, "Molecular dynamics simulations of Ni/NiAl interfaces", Europ. Phys. J. B (published) (2011), online: doi 10.1140/epjb/e2011-20135-9
364. S. Schmauder, Ch. Kohler "Atomistic simulations of solid solution strengthening of α-Iron" Computational Materials Science 50, pp. 1238-1243 (2011).
365. V. Romanova, R. Balokhonov, S. Schmauder, "Microstructure-Based Simulation for the Deformation Behavior of Three-Dimentional Polycrystals", The 19th International Workshop on Computational Mechanics of Materials, 1-4 September, 2009, Constanta, Rumänien, Ovidius University Press, ISBN 978-973-614-509-4, pp. 11-12 (2009).
366. S. Schmauder, C. Kohler, "Atomistic Simulations of Solid Strengthening of Iron", The 19th International Workshop on Computational Mechanics of Materials, 1-4 September, 2009, Constanta, Rumänien, Ovidius University Press, ISBN 978-973-614-509-4, pp. 21-22 (2009).
367. A.-P. Prskalo, S. Schmauder, C. Ziebert, J. Ye, S. Ulrich, "Molecular dynamics simulations of the sputtering processof silicon and the homoepitaxial growth of a Si coating on silicon", The 19th International Workshop on Computational Mechanics of Materials, 1-4 September, 2009, Constanta, Rumänien, Ovidius University Press, ISBN 978-973-614-509-4, pp. 123-124 (2009).
368. Y.Y. Deryugin, G.V. Lasko, S. Schmauder, "Modelling and simulation of the localized plastic deformation by relaxation element method", Comput. Mech. 40, pp. 791-801 (2007).
369. I.-H. You, W. Lutz, H. Gerger, A. Siddiq, A. Brendel, C. Höschen, S. Schmauder, "Fiber push-out study of a copper matrix composite with an engineered interface: Experiments and cohesive element simulation", Int. J. Solids Struct.46, pp. 4277-4286 (2009).
370. H.Y. Tu, Y. Rudnik, S. Schmauder, U. Weber, V. Ploshikhin, "Numerical simulation of crack propagation in electron beam welded joints", The 18th European Conference on Fracture, 30. August-03. September, 2010, Dresden, Germany.
371. V. Petrova, S. Schmauder, "Thermal fracture of functionally graded/homogeneous bimaterials with an interface crack and a system of cracks", The 18th European Conference on Fracture, 30. August-03. September, 2010, Dresden, Germany (accepted) (2011).
372. A. Reuschel, S. Schmauder, T. Merkle, "Dem Verschleiß auf der Spur", Process 3, S. 64-66 (2010).
373. S. Schmauder, S. Hocker, P. Kumar, "Molecular dynamics simulations of tensile tests and interfacial fracture in Ni/NiAl and Ni/Ni3Al", The 18th European Conference on Fracture, 30. August-03. September, 2010, Dresden, Germany (submitted) (2010).
374. V. Romanova, R. Balokhonov, S. Schmauder, "Multiscale Simulation of Deformation Processes in Welded Steel Specimens", Multiscale Materials Modelling, Proceedings of the Fifth Int. Conference Multiscale Materials Modelling, Freiburg, Germany, Eds.: P. Gumbsch, E. van der Giessen, Fraunhofer Verlag, pp. 523-526 (2010).
375. R. Balokhonov, V. Romanova, S. Schmauder, "Multiscale analysis of deformation and fracture in coated material under dynamic loading. Numerical simulation", Multiscale Materials Modelling, Proceedings of the Fifth Int. Conference Multiscale Materials Modelling, Freiburg, Germany, Eds.: P. Gumbsch, E. van der Giessen, Fraunhofer Verlag, pp. 360-363 (2010).
376. V. Petrova, S. Schmauder, "Crack - Interface Crack Interactions in Functionally Graded/Homogeneous Composite Bimaterials Subjected to a Heat Flux", Mech.Composite Mater. 47, pp. 125-136 (2011).
377. V. Romanova, R. Balokhonov, S. Schmauder, "A comparative analysis of the mesoscale stress-strain state in two- and three-dimensional polycrystalline specimens", Physical Mesomechanics 13, pp. 178-183 (2010).
378. R. Balokhonov, V. Romanova, S. Schmauder, "Mesoscopic analysis of deformation and fracture affected by Lüders front propagation in coated steel" (submitted) (2010).
379. S.E. Kulkova, S.V. Eremeev, S. Hocker, S. Schmauder, "Electronic structure and adhesion on the metal-alu-mina interface", Phy. Solid. State 52, pp. 2421-2427 (2010).
380. J. Kadkhodapour, A. Butz, S. Ziaei-Rad, S. Schmauder, "A micro mechanical study on failure initiation of dual phase steels under tension using single crystal plasticity model", Int. J. Plasticity 27, pp. 1103-1125 (2011).
381. S. Schmauder, U. Weber, A. Reuschel, M. Willert, "Simulation of the Mechanical Behaviour of Metal Matrix Composites", Materials Science Forum 678, pp. 49-60 (2011).
382. A.-P. Prskalo, S. Schmauder, C. Ziebert. J. Ye, S. Ulrich, "Molecular dynamics simulations of the sputtering process of silicon and the homoepitaxial growth of a Si coating on silicon", Computational Materials Science 50, pp. 1320-1325 (2011).
383. V. Petrova, S. Schmauder, "Crack - Interface Crack Interactions in Functionally Graded/Homogeneous Composite Bimaterials Subjected to a Heat Flux", Mech. Composite Mater. 47, pp. 125-136 (2011).
384. Ž. Božić, M. Mlikota, S. Schmauder, "Application of the DK, DJ and DCTOD parameters in fatigue crack growth modelling", Technical Gazette 18, pp. 459-466 (2011).
385. J. Huang, S. Schmauder, U. Weber, S. Geier, "Micromechanical modelling of the elastoplastic behaviour of nanodispersed elastomer particle-modified PA 6", Computational Materials Science 52, pp. 107-111 (2011).
386. E.-M. Craciun, N. Peride, S. Schmauder, Preface IWCMM 19, Computational Materials Science 50, p. 1219 (2011).
387.

D. Molnar, P. Binkele, S. Hocker, S. Schmauder, "Atomistic multiscale simulations on the anisotropic tensile behaviour of copper-alloyed a-iron at different states of thermal ageing", Phil. Mag. 92, pp. 586–607 (2012).
388. J. Kadkhodapour, S. Schmauder, D. Raabe, S. Ziaei-Rad, U. Weber, M. Calcagnotto, "Experimental and numerical study on geometrically necessary dislocations and non-homogeneous mechanical properties of the ferrite phase in dual phase steels", Acta Materialia 59, pp. 4387-4394 (2011).
389. Ž. Božić, S. Schmauder, M. Mlikota, "Fatique growth models for multiple long cracks in plates under cyclic tension based on DKI, DJ-integral and DCTOD parameter", The 10th International Conference on Fracture and Damage Mechanics, 19.-21. September, 2011, Dubrovnik, Croatia (accepted) (2011).
390. V. Romanova, R. Balokhonov, S. Schmauder, "Three-dimensional analysis of mesoscale deformation phenomena in welded low-carbon steel", Mat. Sci. Eng. A 528, pp. 5271-5277 (2011).
391. J. Huang, S. Schmauder, U. Weber, S. Geier, "Structure/Property-Correlation Of Nanodispersed Elastomer Particle-Modified PA 6", 22. Stuttgarter Kunststoff-Kolloquium, 16.-17. März 2011, Stuttgart, Tagungsband 1/V9, Eds.: C. Bonten, M.R. Buchmeiser, IKT, IPOC, Universität Stuttgart, pp. 1-7 (2011).
392. V. Petrova, S. Schmauder, "Thermal fracture of a functionally graded/homogeneous bimaterial with system of cracks", Theor. Appl. Fract. Mech. 55, pp. 148-157 (2011).
393. M. Sonntag, S. Hotta, D. Karastoyanova, D. Molnar, S. Schmauder, "Using Services and Service Compositions to Enable the Distributed Execution of Legacy Simulation Applications", Proceedings of the 4th European Conference ServiceWave 2011, October 26-28, 2011, Poznan, Poland (accepted) (2011).
394. H.Y. Tu, S. Schmauder, U. Weber, Y. Rudnik, V. Ploshikhin, "Numerical simulation and experimental investigation of the damage behavior on electron beam welded joints", 11th International Conference on the mechanical Behavior of Materials, June 5-9, 2011, Como, Italy, Procedia Engineering 10, pp. 875-880 (2011) (published online available: doi:10.1016/j.proeng.2011.04.144).
395. V. Silberschmidt, S. Schmauder, Preface IWCMM 20, Computational Materials Science 52 (2012).
396. Ž. Božić, S. Schmauder, M. Mlikota, "Fatique growth models for multiple long cracks in plates under cyclic tension based on DKI, DJ-integral and DCTOD parameter" Key. Eng. Mat. Vols. 488-489, pp. 525-528 (2012) (online: doi: 10.4028/www.scientific.net/KEM.488-489.525).
397. M. Sonntag, S. Hotta, D. Karastoyanova, D. Molnar, S. Schmauder, "Workow-Based Distributed Environment For Legacy Simulation Applications", Proceedings of the Sixth International Conference on Software and Data Technologies (ICSOFT 2011), Poster Paper, SciTePreess Digital Library (2011).
398. S. Hocker, P. Beck, S. Schmauder, J. Roth, H.-R. Trebin, "Simulation of crack propagation in alumina with ab initio based polarizable force field", J. Chem. Phy. 136, pp. 084707-1-084707-9 (2012) (published online: doi: 10.1063/1.3685900).
http://arxiv.org/abs/1112.0563
399. D. Molnar, C. Niedermeier, A. Mora, P. Binkele, S. Schmauder, "Activation Energies for Nucleation and Growth and Critical Cluster Size Dependence in JMAK Analyses of Kinetic Monte-Carlo Simulations of Precipitation", Symposium in Honor of the 75th Birthday and Scientific Life of Prof. Ingo Müller, 15.-17. Dezember 2011, Berlin, pp. 365-376, CD-ROM (2011).
400. G. Lasko, Z. Burghard, S. Schmauder, U. Weber, "FEM-Simulation der mechanischen Eigenschaften bionisch inspirierter TiO2/PE Nano-Verbundwerkstoffe", Jahrestagung der Deutschen Gesellschaft für Biomaterialien 2011, 10.-12. November 2011, Gießen, Biomaterialien 12, S. 110 (2011).
401. H.Y. Tu, S. Schmauder, U. Weber, "Numerical study of electron beam welded butt joints with the GTN model", Com. Mech. (submitted) (2012).
402. S.E. Kulkova, S.S. Kulkov, A.V. Bakulin, S. Hocker, S. Schmauder, "First-principles study of the hydrogen absorption at Σ5 symmetrical tilt grain boundary in B2-TiFe alloy”, Int. J. Hydr. Energy 37, pp. 6666-6673 (2012).
403. S. Kulkova, A. Bakulin, S. Hocker, S. Schmauder, E. Chulkov, "Ab-initio study of metal-zirconia interfaces“, Mater. Sci. Eng. 38, pp. 1-7 (2012).
404. G. Lasko, M. Apel, A. Carré, U. Weber, S. Schmauder "Effect of Microstructure and Hydrogen Pores on the Mechanical Behavior of an Al7%SiO.3%Mg Alloy Studied by a Combined Phase-Field and Micromechanical Approach", Adv. Eng. Mat. 14, pp. 236-247 (2012) (published online available: doi 10.1002/adem.201100188).
405. V. Petrova, S. Schmauder, "Interaction of a system of cracks with an interface crack in functionally graded/homogeneous biomaterials under thermo-mechanical loading", Computational Materials Science 64, pp. 229-233 (2012).
406. D. Molnar, R. Mukherjee, A. Choudhury, A. Mora, P. Binkele, M. Selzer, B. Nestler, S. Schmauder, "Multiscale simulations on the coarsening of Cu-rich precipitates in a-Fe using kinetic Monte Carlo, Molecular Dynamics and Phase-Field simulations", Acta Materialia xx (submitted) (2012).
407. V. Romanova, R. Balokhonov,S. Schmauder, E. Schwab, "Mesoscale analysis of deformation and fracture in coated materials", Computational Materials Science 64, pp. 306-311 (2012).
408.  J. Huang, S. Geier ,S. Schmauder, U. Weber, "Modeling Stiffness of Nanolayered Silicate-Modified Polyamide 6 via FEM Micromechanical Modeling and Analytical Composite Models", J. App. Poly. Sci. 125 (6), pp. 4416-4420 (2012).
409. H.Y. Tu, S. Schmauder, U. Weber, Y. Rudnik, V. Ploshikhin, "Simulation of the damage behaviour of electron beam welded joints with the Rousselier model", Eng. Fract. Mech., (in press) (2012).
410. D. Molnar, C. Niedermeier, A. Mora, P. Binkele, S. Schmauder, "Activation energies for nucleation and growth and critical cluster size dependence in JMAK analyses of kinetic Monte-Carlo simulations of precipitation", Cont. Mech. Thermod. (in press) (2012).
411. N. O'Dowd, D. O'Mahoney, S. Schmauder, Preface IWCMM 21, Computational Materials Science 64, p. 1 (2012).
412. A. Siddiq, S. Schmauder, "Role of local mode mixity and stress triaxiality in the fracture of niobium/alumina bi-crystal interfaces – a CPFEM based study" (2012).
413. S. Küster, U. Weber, S. Schmauder, “Inverse Finite-Elemente-Simulationen zur Bestimmung der transversalisotropen Materialkennwerte von Kohlenstofffasern in umformbaren CFK-Schichten,” in Tagungsband zum 15. Werkstofftechnischen Kolloquium in Chemnitz, Ed.: B. Wielage, Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen, Band 47, Eigenverlag, Chemnitz, pp. 437–441, ISBN 978-3-00-039358-7, (2012).
414. S.E. Kulkova, A.V. Bakulin, S.S. Kulkov, S. Hocker, S. Schmauder, "Hydrogen sorption in titanium alloys with a symmetric Σ5 (310) tilt grain boundary and a (310) surface", Jour. Exp. Theo. Phy. 115, pp. 462-473 (2012).
415. T. Merkle, A. Reuschel, S. Schmauder, "Hart im Nehmen – Prozesssicherheit durch Verschleißschutz, Verfahrens­tech­nik", Vereinigte Fachverlage, Heft 9/2012 Mainz (2012).
416. T. Merkle, A. Reuschel, S. Schmauder, "Verschleißschutz für Graugusspumpen – Die richtigen Beschichtungssy­steme schützen vor abrasiven Medien", chemie-anlagen + verfahren, Heft 8/2010, Konradin Verlag, Leinfelden-Echterdingen (2010). 
417. V. Romanova, R. Balokhonov, S. Schmauder, "Numerical study of mesoscale surface roughening in alumi­num polycrystals under tension", Mat. Sci. Eng. A 564, pp. 255-263 (2013).
418. S. Katani, S. Ziaei-Rad, N. Nouri, N. Saedie, J. Kadkhodapour, N. Torabian, S. Schmauder, "Microstructure modelling of dual phase steel using SEM micrographs and Voronoi Polycrystal models", Metallogr. Microstruct. Anal. 2, pp. 156-169 (2013).
419. Ž. Božić, S. Schmauder, M. Mlikota, M. Hummel, "Fatique Crack Growth Modelling in Welded Stiffened Pa­nels under Cyclic Tension", 13th International Conference on Fracture,  June 16-21, 2013, Beijing, China (2013).
420. G. Lasko, Z. Burghard, J. Bill, I. Schäfer, U. Weber, S. Schmauder, "Simulation of Mechanical Properties of Bio-Inspired TIO2/PE Nanocomposites", Adv. Eng. Mater. 15, pp. 908-920 (2013).
421. A. Bakulin, S. Kulkova, S. Hocker, S. Schmauder, "Investigation of chemical bonding at metal-ceramic inter­faces", International Conference on Functional Materials and Nanotechnologies, April 17-20, 2012, Riga, Latvia, IOP Conf. Ser.: Mat. Sci. Eng. 38 (2012) (doi: 10.1088/1757-899X/38/1/012014)
422. S. Kulkova, A. Bakulin, S. Hocker, S. Schmauder, "Ab-inito study of metal-zirconia interfaces", International Conference on Functional Materials and Nanotechnologies, April 17-20, 2012, Riga, Latvia, IOP Conf. Ser.: Mat. Sci. Eng. 38 (2012) (doi: 10.1088/1757-899X/38/1/012004)
423. R. Balokhonov, V. Romanova, S. Schmauder, E.A. Schwab, S.A. Martynov, "The influence of Lüders front propagation on the strength of the "coating-substrate" composite. Numerical simulation", Mech. Com. App. 3, pp. 283-305 (2012).
424. J. Kadkhodapour, S. Schmauder, A. Butz, "Micro-Mechanical Study on Failure Initiation of Dual Phase Steels under Tension using a Single Crystal Plasticity Model: Martensite Shape Effect in Failure Initiation", in: MEFORM 2013 Simulation von Umformprozessen, 20.-22. März 2013, Altenberg, Tagungsband, Hrsg.: R. Kawalla, Institut für Metallformung, Technische Universität Bergakademie Freiberg, Freiberg/Sachsen, S. 117-124 (2013).
425. N.P. O’Dowd, S. Schmauder, Preface, Computational Materials Science (in press) (2013).
426. H. Tu, S. Schmauder, U. Weber, "Numerical study of the fracture behavior of an electron beam welded steel joint by cohesive zone modeling", 13th International Conference on Fracture, June 16-21, 2013, Beijing, China (2013).
427. J. Wiedmaier, U. Weber, S. Schmauder, "Simulation of  the mechanical behavior of nanodispersed elastomer particle-modified polyamide 6", Adv. Mat. Res. 746, pp. 250-255 (2013) (online available: doi: 10.4028/www.­scien­tific.net/AMR.746.250).
428. S. Hocker, P. Binkele, S. Schmauder: “Precipitation in α -Fe based Fe-Cu-Ni-Mn-alloys: behaviour of Ni and Mn modelled by ab initio and kinetic Monte Carlo simulations.” Applied Physics A 115, pp. 679-687 (2014).
429. Z. Bozic, S. Schmauder, "The Influence of Residual Stresses on Fatique Crack Growth Rate in Stiffened Pa­nels", 2th Mediterranean Conference on Heat Treatment and Surface Engineering & Challenges for Heat Treatment and Surface Engineering, June 11-14, 2013, Dubrovnik-Cavtat, Croatia (2013).
430. S. Schmauder, A. Krebs, T. Merkle "Wider den Verschleiß", chemie&more 0313, pp. 3-5 (2013).
431. D. Molnar, F. Maier, P. Binkele, S. Schmauder, "Molecular dynamics simulations on the coherency of Cu pre­cipitates in BCC Fe", ECCOMAS 2012 – European Congress on Computational Methods in Applied Sciences and Engi­neering, 10.-14. September, 2012, Wien, Österreich, e-Book Full Papers, pp. 3631-3637 (2012).
432. S. Kulkova, A. Bakulin, S. Hocker, S. Schmauder, "Theoretical Study of Adhesion at the Metal-Zirconium Dio­xide Interfaces", Tech. Phys. 58, pp. 325-334 (2013).
433. M. Mlikota, S. Schmauder, U. Weber, "The Change to Renewable Energies Needs Improved Conventional Power Plants: A Better Understanding of the Influence of Droplet Size on Erosion Process", Proceedings of 2nd Workshop on "Renewable Energies, Smart Grid and Green ICT", 26.-27. November, 2012, Universität Stuttgart (2012).
434. G. Lasko, I. Schäfer, Z. Burghard, J. Bill, S. Schmauder, U. Weber, D. Galler, "Derivation of the Stress-Strain Be­­havior of the constituents of Bio-Inspired Layered TIO2/PE-Nanocomposites by Inverse Modeling Based on FE-Simulations of Nanoindentation Test",  MCB Molecular and Cellular Biomechanics 10, pp. 27-42 (2013).
435. D. Molnar, P. Binkele, A. Mora, R. Mukherjee, B. Nestler, S. Schmauder, "Molecular Dynamics virtual testing of thermally aged Fe-Cu microstructures obtained from multiscale simulations", Computational Materials Science 81, pp. 466-470 (2014).
436. U. Heisel, S. Schmauder, R.D. Koyee, R. Eisseler "Application of Fuzzy Multiple Attribute Decision Making (FMADM) for optimizing surface quality charac­teristics in turning austenitic and duplex stainless steels",  Int. J. Adv. Manuf. Tech. (submitted) (2013).
437. U. Heisel, S. Schmauder, R.D. Koyee, R. Eisseler, "Multiperformance Optimization in Turning of Stainless Steels using Taguchi-Vikor-Metaheuristic Concept", International Conference on Advanced Manufacturing Engi­neering and Technologies, October 27-30, 2013, Royal Institute of Technology, Stockholm, Schweden (accepted) (2013).
438. U. Heisel, S. Schmauder, R.D. Koyee, J. Rothmand, "Machining of Stainless Steels: A Comparative Study", International Conference on Advanced Manufacturing Engineering and Technologies, October 27-30, 2013, Royal Institute of Technology, Stockholm, Schweden (accepted) (2013).
439. T.I. Zohdi, S. Schmauder, Preface, Comp. Mech. 50, p. 157 (2012).
440. N.P. OꞌDowd, S. Schmauder, "Preface to topical special issue of computational materials science on "Recent advances in computational mechanics of materials", Computational Materials Science 80, p. 1 (2013).
441. Z. Bozic, S. Schmauder, M. Mlikota, M. Hummel, "Multiscale fatigue crack growth modelling for welded stiffened panels", Fat. Fract. Eng. Mat. Struct. 37, pp. 1043-1054 (2014) (doi: 10.1111/ffe.12189) (doi: 10.1111/ffe.12189).
442. Z. Bozic, S. Schmauder, H. Wolf, "The Influence of Residual Stresses on Fatique Crack Growth Rate in Stiffe­ned Panels", Proceedings of 2nd Mediterranean Conference & New Challenges On Heat Treatment And Surface Engineering, June 11-14, 2013, Dubrovnik-Cavtat, pp. 435-444 (2013).
443. V. Petrova, S. Schmauder, "Modelling of Thermal Fracture of Functionally Graded/Homogeneous Bimaterial Structures under Thermo-Mechanical Loading", Key Eng. Mat.  592-593, pp. 145-148 (2014).
444. S. Hocker, S. Schmauder, A. Bakulin, S. Kulkova, "Ab initio investigation of tensile strengths of metal(1 1 1)/-Al2O3(0 0 0 1) interfaces", Phil. Mag. 94, pp.265-284 (2014).
445. S. Schmauder, "Recent advances in Multiscale Materials Modelling", Bilt. Razreda teh. znan., god. 13: br. 1, str. 7-22 (2013).
446. S. Schmauder, U. Weber, "Simulation of the mechanical behavior of W/Cu composites containing FGM rela­ted interpenetrating microstructures under consideration of phase dependent damage limit", Research an Applications in Structural Engineering, Mechanics & Computation: Proceedings of the 5th International Conference on Structural Engineering, Mechanics and Computation, SEMC 2013, pp. 381-386 (2013).
447. R. Koyee, U. Heisel, R. Eisseler, S. Schmauder, "Modeling and Optimization of Turning Duplex Stainless Steels", Int. Jour. Mach. Tools and Manufacture (submitted)
448. R. Koyee, R. Eisseler, S. Schmauder, “Application of Taguchi coupled Fuzzy Multi Attribute Decision Making (FMADM) for optimizing surface quality in turning austenitic and duplex stainless steels", The 3rd Internati­o­nal Conference on Manufacturing Engineering and Process, ICMEP 2014, April 10-11, 2014, Seoul, Korea (accep­ted) (2014).
449. H.Y. Tu, S. Schmauder, U. Weber, „Numerical simulation of crack propagation in Al6061 laser welded joints, 20th European Conference on Fracture, ECF20, June 30-July 04, 2014, Trondheim, Norway, Proc. Mat. Sci. 3, pp. 414-420 (2014).
450. Z. Bozic, S. Schmauder, “Fracture modeling of damaged stiffened panels under lateral pres­su­re load", 20th European Conference on Fracture, ECF20, June 30-July 04, 2014, Trondheim, Norway, Proc. Mat. Sci., pp. 1129-1134 (2014).
451. V. Petrova, S. Schmauder, "FGM/homogeneous biomaterials with systems of cracks under thermo-mechani­cal loading: Analysis by fracture criteria", Eng. Fract. Mech. 130,pp. 12-20 (2014).
452. K. Kerkhof, G. Hinz, F. Dwenger, S. Schmauder, "Influence of Local Wall Thinning and Support Stiffness in Piping Systems on Safety Assessments for Dynamic Loading", Proceedings of the ASME 2014 Pressure Vessels & Piping Conference, July 20-24, 2014, Anaheim, California, USA, pp. 1-10 (2014).
453. A. Fotovati, J. Kadkhodapour, S. Schmauder, "Artificial Neural Networks Investigation of Indentation Force Effects on Nano- and Microhardness of Dual Phase Steels", Mat. Sci. Eng. A (submitted) (2014).
454. J. Kadkhodapour, S. Raeisi, H. Montazerian, A. Rahbari, S. Schmauder, "Simulation of mechanical properties for porous microstructure of bone", Int. Jour. Num. Meth. Biomed. Eng. (submitted) (2014).
455. I. Schäfer, G. Lasko, T.A. Do, J. Pleiss, U. Weber, S. Schmauder, "Peptide – zinc oxide interaction: finite ele­ment simulation using cohesive zone models based on molecular dynamics simulation", Computational Materials Science 95, pp. 320-327 (2014).
456. J. Kadkhodapour, B. Anbarlooie, H. Hosseini-Toudeshky, S. Schmauder, “Simulation of shear failure in dual phase steels using localization criteria and experimental observation”, Computational Materials Science 94, pp. 106-113 (2014).
457. G. Lasko, U. Weber, M. Apel, R. Berger, S. Schmauder, “Finite Element Analysis of Crack Propagation in AlSi7%MgO.3% Cast Alloys using Macro- and Micro-Scale Levels”, Adv. Eng. Mat. 11 , pp. 1536-1546 (2015).
458. V. Petrova, S. Schmauder, “Crack Closure Effects in Thermal Fracture of Functionally Graded/Homogeneous Bimaterials with Systems of Cracks”, ZAMM 95, pp. 1027-1036 (2015).
459. P. Weidmann, U. Weber, S. Schmauder, G. Pedrini, W. Osten, „Numerical Calculation of Temperature and Surface Topology during a Laser Ablation Process for Ceramic Coatings“, Meccanica 51, pp. 279-289 (2016) (doi: 10.1007/s11012-015-0220-2).
460. E.V. Shilko, S.G. Psakhie, S. Schmauder, V.L. Popov. S.V. Astafurov, A.Y. Smolin, “Overcoming the limitations of distinct element method for multiscale modeling of materials with multimodal internal structure”, Computational Materials Science 102, pp. 267-285 (2015).
461. Z. Ilhan, A. Hornes, N. Sata, O. Freitag, A. Ansar, G. Schiller, A. Friedrich, V. Guski, U. Weber, A. Krebs, S. Schmauder "Self-Healing Plasma Sprayed Ceramic Coatings”, Proceedings of International Thermal Spray Conference (ITSC 2015), May 11-14, 2015, Long Beach, Californien, USA, Jour. Therm. Spray. Tech. (accepted) (2015).
462. C.T. Bodur, S. Schmauder, “Effects of cohesive zone traction separation law parameters on the stresses at grain/matrix interface”, Adv. Mech. Eng. (submitted) (2015).
463. J. Kadkodapour, S. Schmauder, M. Hoseinpour, “Multi-Objective Investigation and  Optimization of Coronary CYPHER Stent”, Comp. Meth. Appl. Mech. Eng. (submitted) (2015).
464. J. Kadkhodapour, H. Montazerian, A. Darabi, A. Anaraki, S. Ahmadi, A. Zadpoor, S. Schmauder, “Failure mechanisms of additively manufactured porous biomaterials: Effects of porosity and type of unit cell”, Jour. Mech. Beh. Bio. Mat. 50, pp. 180-191 (2015) (doi.org/10.1016/j.jmb-bm.2015.06.012).
465. A. Alaie, S. Ziaei Rad, J. Kadkhodapour, M. Jafari, M. Asadi Asadabad, S. Schmauder, “Effect of microstructure pattern on the strain localization in DP600 steels analyzed using combined in-situ experimental test and numerical simulation”, Mat. Sci. Eng.  A 638, pp. 251-261 (2015).
466. I. Yi, J. Wiedmaier, U. Weber, S. Schmauder, “Modeling and Simulation of Mechanical Properties of Nano Particle Modified Polyamide 6”, Jour. Mat. Sci. Chem. Eng. 3, pp. 80-87 (2015) (doi.org/10.4236/msce.2015.31012).
467. M. Uhrig, J. Wiedmaier, U. Weber, S. Schmauder, „Numerical Simulation of Mechanical Properties of Nano Particle Modified Polyamide 6 via RVE Modeling“, Jour. Mat. Sci. Chem. Eng. 3, pp. 95-102 (2015) (dx.doi.org/10.4236/msce.2015.31014).
468. J. Huang, W. Verestek, M. Uhrig, U. Weber, S. Schmauder, “Multiscale Simulation of the Mechanical Behavior of Particle-Modified Polyamide”, 24. Stuttgarter Kunststoff-Kolloquium, 25. – 26. Februar, 2015.
469. J. Kadkhodapour, H. Montazerian, M. Samadi, S. Schmauder, A. Abouei Mehrizi, “Plastic de-formation and compressive mechanical properties of hollow sphere aluminum foams produced by space holder technique”, Mat. & Desig. 83, pp. 352-362 (2015) (doi.org/10.1016/j.mar-des.2015.05.086).
470. D. Molnar, U. Weber, P. Binkele, D. Rapp, S. Schmauder, “Prediction of macroscopic damage behavior of precipitation strengthened steels via multiscale  simulations”, GAMM-Mitt. 38, pp. 228-247 (2015) (doi.10.1002/gamm.2015.10013).
471. M. Tawadros, R. Koyee, A. Afifi, S. Schmauder, „Application of Response Surface Methodology in High Speed Turning of Titanium Alloy (Ti-6Al-4V)“, Prod. Manu. Res. (2015).
472. A. Prakash, M. Hummel, S. Schmauder, E. Bitzek, “NanoSCULPT: A methodology for generating complex realistic configurations for atomistic simulations”, Meth.X. 3, pp. 219-230 (2016).
473. S. Hocker, M. Hummel, P. Binkele, H. Lipp, S. Schmauder, „Molecular dynamics simulations of tensile tests of Ni-, Cu-, Mg- and Ti-alloyed aluminium nanopolycrystals”, Computational Materials Science 116, pp. 32-43 (2016) (doi.org/10.1016/j.commatsci.2015.07.047).
474. M. Mlikota, S. Schmauder, U. Weber, „Multiscale Modelling of Overload Effects on Fatique Crack Initiation in Case of Carbon Steel”, Eng. Fail. Anal. (submitted) (2015).
475. A. Fotovati, J. Kadkhodapour, S. Schmauder, “Artificial Neural Networks Investigation of Indentation Force Effects Microhardness of Dual Phase Steels“, Jour. Met. 2014, pp.1-11 (doi.org/10.1155/2014/813234).
476. H.Y. Tu, S. Schmauder, U. Weber, “Simulation of the fracture behavior of Al6061 laser welded joints with the Rousselier model”, Computational Materials Science 116, pp. 122-128 (2016).
477. J. Kadkhodapour, H. Montazerian, A.C. Darabi, A.P. Anaraki,, S. Schmauder, “Damage behavior and failure mechanisms of TPMS-based tissue engineering scaffolds processed by selective laser melting: Bending versus stretching dominated architectures”, Act. Biomat. (submitted) (2015).
478. J. Song, F. Dörfler, M. Guyenot, S. Schmauder, “Experimental investigation of ultrasonic ribbon bonding process on power modules”, 8. GMM/DVS-Fachtagung Elektronische Baugruppen und Leiterplatten EBL 2016, 16.-17. Februar 2016, Schwabenlandhalle Fellbach (2016).
479. V. Guski, D. Willer, A. Ansar, S. Schmauder, „Microstructural Investigation of Plasma Sprayed Ceramic Coatings for Solid Oxide Fuel Cell Application by Means of FEG-SEM-FIB“, 41st  MPA-Seminar, October 5.-6.2015, Stuttgart (2015).
480. Z. Zhang, Z.F. Hu, S. Schmauder, „Cyclic behavior of 12% Cr ferritic-martensitic steel upon long-term on-site service in power plants”, Fat. Fract. Eng. Mat. Struc., pp. 1-14 (accepted) (2016) (doi: 10.1111/ffe.12421).
481. B. Last, M. Eberhardt, M. Sackmann, B. Warner, I. Demirdelen, F.P. León, R. Suteekarn, S. Schmauder, “Closed Loop Control Strategies for Glow Plug Surface Temperature“, 12. Internationales Stuttgarter Symposium. 13.-14. März 2012 (submitted).
482. S. Schmauder, D. Rapp, P. Binkele, D. Molnar, “Multiscale materials modelling: Procedures, examples and challenges”, Sixth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2016), September 06-07, 2016, Cape Town, South Africa (2016).
483. Z. Zhang, Z.F. Hu, S. Schmauder, M. Mlikota, K.L. Fan, “Low cycle fatique properties of P92 ferritic-martensitic steel at elevated temperature”, Int. Jour. Mat. Eng. Perf. (accepted) (2016) (doi: 101007/s11665-016-1977-8).
484. A.V. Bakulin, T.I. Spiridonova, S.E. Kulkova, S. Hocker, S. Schmauder, „Hydrogen diffusion in doped and undoped α-Ti: An ab-initio investigation“, Int. Jour. Hyd. Energ., pp. 1-9 (in press) (2016) (dx.doi.org/10.1016/j.ijhydene.2016.03.192).
485. G. Pedrini, V. Martinez-Garcia, P. Weidmann, M. Wenzelburger, A. Killinger, U. Weber, S. Schmauder, R. Gadow, W. Osten, “Residual Stress Analysis of Ceramic Coating by Laser Ablation and Digital Holography”, Exp. Mech. (accepted) (2016) (doi 10.1007/s11340-015-0120-3).
486. S. Schmauder, I. Schäfer, “Multiscale materials modeling”, Mat. Tod. 19 (accepted) (2016) (dx.doi.org/10.1016/j.mattod.2016.01.013).
487. S.R. Naib, M. Mlikota, S. Schmauder, “Modelling the Influence of Water Droplet Impacts on Steam Turbine Blade Surfaces”, Int. Jour. Mech. Mat. Eng. (submitted) (2016).
488. M. Mlikota, S. Schmauder, U. Weber, S.R. Naib, “Numerical Study of Erosion Incubation Stage in the Case of Water Droplet Impingement”, Int. Jour. Mech. Mat. Eng. (submitted) (2016).
489. M.A. Choudhary, U. Weber, S. Schmauder, “Identifying the hot spots and possible crack locations in thin stainless steel structures subjected to fatique loading”, Fatiq. Fract. Eng. Mat. Struc. (submitted) (2016).
490. H.Y. Tu, S. Schmauder, U. Weber, „Simulation of the fracture behavior of an S355 electron beam welded joint by cohesive zone modeling“, Eng. Fract. Mech. (in press) (2016).
491. V. Petrova, S. Schmauder, H. Altenbach, R. Pyrz, “Preface to topical special issue of computational materials science on “Micromechanics of Metal Ceramic Composites”, Computational Materials Science 116, p.1 (2016).
492. J. Segurado, T. Sadowski, J. LLorca, S. Schmauder, “Preface: special issue on computational micromechanics of materials”, Mecc. (submitted) (2015 (doi 10.1007/s11012-015-0305-y).
493. V. Petrova, S. Schmauder, A. Shashkin, „Modeling of edge cracks interaction”, F&IS 36, pp. 8-26 (2016) (doi: 10.3221/IGF-ESIS.36.02).
494. R.D. Koyee, S. Schmauder, U. Heisel, R. Eisseler, „Numerical Modeling and Optimization of Machining Duplex Stainless Steels“, Jour. Mat.  Proc. Tech. (submitted) (2014).
495. G. Lasko, U. Weber, S. Schmauder, „Finite Element Simulations of Crack Propagation in Al2O3/6061Al Composites“, Act. Met. Sin. (Engl. Lett.) 27, pp. 853-861 (2014) (doi 10.1007/s40195-014-0124-5).
496. A.V. Bakulin, S.S. Kulkov, S.E. Kulkova, S. Hocker, S. Schmauder, „Influence of substitutional impurities on hydrogen diffusion in B2-TiFe alloy“, Int.  Jour. Hyd. Energ. 39, pp. 12213-12220 (2014).
497. R.R. Balokhonov, V.A. Romanova, S. Schmauder, S.A. Martynov, Zh.G. Kovalevskaya, “A mesomechanical analysis of plastic strain and fracture localization in a material with a bilayer coating”, Comp. Part B 66, pp. 276-286 (2014).
498. S. Manzhos, S. Schmauder, A. Koh, L.H. Poh, S. Joshi, V. Tan, „Preface to the IWCMM23 special issue“, Computational Materials Science 94, p. 1 (2014).
499. S. Sajadi, S. Hocker, A. Mora, P. Binkele, J. Seeger, S. Schmauder, “Precipitation in a copper matrix modelled by ab initio calculations and atomistic kinetic Monte Carlo simulations”, Phy. Stat. Soli. A (submitted) (2016).
500. P. Weidmann, G. Pedrini, V. Martinez-Garcia, M. Wenzelburger, A. Killinger, S. Schmauder, R. Gadow, W. Osten, „Evaluation of residual stress determinations conducted with laser ablation and optical displacement measurement“ (submitted) (2016).
501. S. Hocker, D. Rapp, S. Schmauder, „Molecular dynamics simulations of strengthening due to silver precipitates in copper matrix“, Phy. Stat. Sol. B (submitted) (2016).
502. Z.F. Hu, Z. Zhang, H.Y. Tu, S. Schmauder, „Microstructure evolution in HR3C austenitic steel during long-term creep at 650 degrees C”, Mat. Sci. Eng. A (submitted) (2016).

 

Zum Seitenanfang